Year 2022-23

S.N	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Sanjaykumar Gawade, Sumit v Patil Laxman Y. Waghmode,	Effect of low-cost automation on labor productivity and labor fatigue for corrugated boxes flaps twisting	IOS Press	73	1	143-155	2022-23	53			ISSN -10519815, 18759270
2.	Sanjaykumar Gawade, Amol B. Chavan	A review on surface coating techniques on Mg based bio-degradable implants	Materials today: Proceedings	72	3	1361-1366	2022-23	56	2.52		ISSN -22147853
3.	Pratik A. Patil, Sachin K. Patil	Assessment of surface integrity and hole quality in graphene-based NMQL Micro-drilling of ceramic-coated Nimonic 90 for gas turbine applications	Engineering Research Express of IOP publisher	5	1	1-21	2022-23	9	1.205		Doi.org/10.1088/2631-8695/acb9ff
4.	Sachin N.Sawant, Sachin K. Patil	Effect of copper, tungsten copper and tungsten carbide tools on micro-electric discharge drilling of Ti-6Al-4V alloy	Journal of Materials Research and Technology	24	1	4242-4257	2022-23	77	6.267		doi.org/10.1016/j.jmrt.2023.04.067
5.	Sachin K. Patil, Swapnil Lahane,	Circular supply chain implementation performance measurement framework: A comparative case analysis	Production Planning & Control	258	-	120859-12870	2022-23	92	6.441		ISSN 09537287, 13665871 doi.org/10.1080/09537287.2023.2180684
6.	Ganesh Suryawanshi, Sachin K. Patil, R. G. Desavale	Empirical-based DA and ANN to diagnose misalignment in rotor-bearing system	Nondestructive Testing and Evaluation	39	02	1-27	2022-23	35	2.98		doi.org/10.1080/10589759.2023.2228979
7.	Vishal G. Salunkhe, R. G. Desavale,Suraj Kumbhar	Vibration Analysis of deep groove ball bearing using finite element analysis and dimension analysis	Journal of Tribology	144	1	081202-1-081202-12	2022-23	95	2.5		DOI 10.1115/1.4053262
8.	R. G. Desavale, Sushant M. Patil, R.R.Malagi,	Fault identification in a nonlinear rotating system using dimensional analysis (DA)and center composite rotatable design (CCRD)	Measurement	200	1	1-11	2022-23	115	5.6		ISSN -0263-2241
9.	R. G. Desavale, Pratiksha S.Salunkhe, Sumit A Shinde	A novel method to classify rolling element bearing faults using k-nearest neighbor machine learning algorithm	Journal of risk and uncertainty in engineering system Part :Mechanical engineering	8	1	031202-1-031202-13	2022-23	17	2.2		DOI 10.1115/1.4053760
10.	Mahadev B. Kumbhar Surajkumar G. Kumbhar, R. G. Desavale	Dynamin characterization of MR Fluid-based dynamic vibration	Arabian journal for science and engineering	48	1	1-15	2022-23	60	2.9		DOI 10.1007/s13369-022-07410-3
11.	R. G. Desavale, Prasad Shinde, P.M.Jadhav	A multi-fault classification in a rotor-bearing system using a machine learning approach	Journal of the Brazilian Society of Mechanical Sciences and Engineering	45	2	121-134	2022-23	51	2.2		DOI 10.1007/s40430-023-04015-1
12.	Vishal G. Salunkhe, R. G. Desavale,S.M.Khot	A novel incipient fault detection technique for roller bearing using deep independent component analysis and variation model decomposition	Journal of Tribology	145	1	074301-1--074301-15	2022-23	95	2.5		DOI 10.1115/1.4053262
13.	Khalkar, V., Pratik, O.A.K., moshi, A., hariharasakhtisudhan, P., Jugulkar, L. and Raman	Crack Detection in A Cantilever Beam Using Correlation Model and Machine Learning Approach	Romanian Journal of Acoustics and Vibration	19	2	121-133	2022-23	11	0.39		ISSN -15847284
14.	Kumbhar, S.G., Logesh, K., Hariharasakhtisudhan, P., Jadhav, S.D., Danawade, B.A., Gharat, S.H., Jugulkar, L.M. and Borade	Experimental and Numerical Investigation of a Cracked Cantilever Beam for Damping Factor to Access its Applicability in the Crack Detection	U. Porto Journal of Engineering	8	2	169-196	2022-23	4	0.357		ISSN -21836493
15.	Abhijeet P Shah	Design and development of automotive radiator for better cooling efficiency	Materials today: Proceedings,	72	3	1028-1034	2022-23	56	2.52		ISSN -22147853
16.	Abhijeet Shah, Shrikant Shetgar, Nagaraj Dharwadkar	Assigning the test case priorities using butterfly optimization algorithm for software test	International Journal of software Innovation	10	1	1-12	2022-23	9	1.34		DOI: 10.4018/IJSI.303577
17.	Maruti Mandale, Avinash V. Borgaonkar	Experimental and finite element investigation of statistic energy analysis parameters for idealized subsystem	Materials today: Proceeding	77	3	680-686	2022-23	69	2.52		ISSN -22147853
18.	Maruti Mandale, Avadhut Patil	Experimental analysis of energy conversion and noise suppression mechanism using polyvinylidene difluoride piezoelectric element	Noise and vibration worldwide	53	9	1-10	2022-23	16	1.29		ISSN-09574565
19.	Rajendra Pawar, Maruti Mandale	Recent advancements in synthesis, rheological characterization, and tribological performance of vegetable oil-based lubricants enhanced with nanoparticles for sustainable lubrication	Journal of Cleaner Production	378	1	134454	2022-23	232	10.956		ISSN -134454
20.	Rajendra Pawar, Sharad Patil	Investigating the Effect of Compression Ratio on Operating Characteristics of Compression Ignition Engine Fueled with Diesel—Ricebran Biodiesel—n‑Butanol Additive Blends	Journal of The Institution of Engineers (India): Series E	104	1	129-140	2022-23	11	1.11		doi.org/10.1007/s40034-022-00264-2
21.	Sharad D Patil	Performance analysis of sodium alanate hydride reactor with different nanofluids	International Journal of Hydrogen Energy	48	-	19486-97	2022-23	231	7.139		doi: 10.1016/j-ijhyden.2023.02.105
22.	Santosh R Patil	Design and Simulation of Automotive Radar for Autonomous Vehicles	EUREKA Physics and Engineering	3	1	56-65	2022-23	10			DOI :10.21303/2461-4262.2023.002766
23.	R.V. Pawar	Performance Testing of Multicylinder Compressed Ignition Engine with Dual Fuel Mode of CNG with Biodiesel and Diesel	International Journal of Vehicle Structures and Systems	14	6	703-710	2022-23	48	0.528		doi: 10.4273/ijvss.14.6.02
24.	B.R.Jadhav, Sanket S. Sawant	Need of hybrid electric two wheelers on Indian roads to sustain green environment	International Journal of Mechanical and Production Engineering Research and Development	12	6	1-8	2022-23	25			ISSN- 2249-6890
25.	Ranjit Patil, Samir Kumbhar, Santosh B Rane	Investigation of the damping behavior of shape memory alloy-nitinol reinforced composite	Engineering Research Express of IOP publisher	4	4		2022-23	9	1.205		DOI 10.1088/2631-8695/ac9faa 10.3233/WOR-211065
26.	Shailesh Shirguppikar, M.V.Pachore, S.N.Hankare	Application Of Neural Network For The Detection Of Covid-19 Or Viral Pneumonia	Journal of Positive School Psychology	6	10	782-790	2022-23	5	8		ISSN -27177564
27.	Shailesh Shirguppikar, Phan Nguyen Huu,Muthuramalingam T.	Multi-objective optimization of micro EDM using ALCrNi- Tungsten carbide electrode for Ti-6AL-4V	International journal of advance manufacturing technology	47	3	1-12	2022-23	52	3.77		ISSN -2562499
28.	Rohit Magdum	Experimental investigation and optimization of AZ31 Mg alloy during warm incremental sheet forming to study fracture and forming behaviour	Coatings	13	1	1-16	2022-23	48	3.117		doi.org/10.3399/coating13010068
29.	Sudhindra N. Jalwadi, Tanmay K. Bhandakkar	Development of Virtual Internal Bond method based material model for Carbon fiber and its application to Carbon fiber reinforced epoxy system	Engineering Fracture Mechanics	281	1	1-19	2022-23	138	4.847		doi.org/10.1016/j.engfracmech.2023.109114

Year 2021-22

Publication in H-Index Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	G.L.Suryawanshi,Dr S.K.Patil, ,R. G. Desavale	Dynamic model to predict vibration characteristics of rolling element bearings with inclined surface fault	Journal of international measurement confederation	184	01	109879-1-10	2021-22	91	3.364		https://doi.org/10.1016/j.measurement.2021.109879
2.	R. G. Desavale, P. M. Jadhav, Nagaraj V. Dharwadkar	Dynamic Response Analysis of Gearbox to Improve Fault Detection Using Empirical Mode Decomposition and Artificial Neural Network Techniques	ASME J. Risk Uncertainty Part B	7	3	031007-17	2020-21	13			ISSN: 2332-9017
3.	Vishal G. Salunkhe, R. G. Desavale	An Intelligent Prediction for Detecting Bearing Vibration Characteristics Using a Machine Learning Model	Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems	4	3	31004	2021-22	7			ISSN: 2572-3901
4.	Vishal G. Salunkhe, R. G. Desavale,T.Jagadeesha	A numerical model for fault diagnosis in deep groove ball bearing using dimension th	Material Today: Proceeding	47	11	3077-3081	2021-22	47			ISSN:2214-7853 https://doi.org/10.1016/j.matpr.2021.12.196
5.	Prasad V.Shinde R. G. Desavale,	Application of dimension analysis and soft competitive tool to pre	Measurement	193	1	770984-110995	2021-22	91			ISSN:2214-7853 https://doi.org/10.1016/j.matpr.2021.12.196
6.	Surajkumar G. Kumbhar, R. G. Desavale and N. V. Dharwadkar	Fault size diagnosis of rolling element bearing using artificial neural network and dimension theory	Neural Computing and Applications	33		16079–16093	2021-22	80	5.606		doi.org/10.1007/s00521-021-06228-8
7.	R V Pawar, Sharad Patil, Kamalesh Jagadale, Pranali Gujar, Vishal Barade	An Experimental Investigation on Performance, Combustion, Emission and Vibration Analysis of Diesel Engine Fuelled with Rice Bran Biodiesel and n-Butanol Additive	Journal of Engineering Research (JER)	online	-	-	2021-22	12	1.449	-	ISSN: 2307-1877 Print, Online ISSN: 2307-1885
8.	Dr. Sharad D. Patil, Randhir Y. Chavan	Analysis of flow & heat transfer enhancement of turmeric cooking steam generator	International Journal of Food Processing and Preservation	-	-	1-10	2021-22	48	2.127		ISSN: 01458892, 17454549 DOI: 10.1111/jfpp.16587
9.	Prashant S Jadhav and Chinmaya P Mohanty	Performance assessment of energy efficient and eco-friendly turning of Nimonic C-263: A comparative study on MQL and cryogenic machining	Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture	Online First	-	223-249	2021-22	62	2.61		https://doi.org/10.1177/09544054211061961
10.	Prashant S Jadhav and Chinmaya P Mohanty	Comparative analysis of indirect, direct and hybrid cryogenic machining of Nimonic C-263 super alloy	Journal of Engineering Research (JER)	Online First	-	1-9	2021-22	12	1.449		ISSN: 2307-1877 Print, Online ISSN: 2307-1885
11.	Prashant Jadhav, Vaibhav Sidraya Ganachari, Uday Chate, Satish Mullya	Simulation and experimental investigation of tool wear rate in dry and near-dry EDM process	World Journal of Engineering	18	5	701-709	2021-22	9	-		ISSN:17085284
12.	Prashant S Jadhav,Aanosh Ware	Optimizing the Plant Layout of a Foundry to Increase Productivity by Employing Systematic Layout Planning (SLP) Technique	Design Engineering	20	09	3999-4020	2021-22	7			ISSN:00119342
13.	Shailesh Shirguppikar, M S Patil	Assessing the effect of uncoated and coated electrode on response variable in Electrical Discharge Machining for Ti6Al4V	Triobolgy in the Industry	43	4	524-534	2021-22	23			doi.org/10.24874/ti.1020.12.20.03
14.	Santosh patil, Shailesh Shirguppikar, Pham Van Dong	Synthesize and characterization of artificial human bone developed by using nanocomposite	EUREKA: Physics and Engineering	3	1	112-120	2021-22	07			ISSN: 24614254, 24614262 doi.org/10.21303/2461-4262.2022.002432
15.	Shailesh Shirguppikar, Nguyen Huu Phan, Ngo Ngoc Vu	Multi-criteria decision making in electrical discharge machining with nickel coated aluminum electrode for titanium alloy using preferential selection index	Manufacturing Review	1	1	1-10	2021-22	16	1.882		ISSN-22654224 doi.org/10.1051/mfreview/2022010
16.	Santosh R. Patil, Sanjaykumar Gawade, Shailesh S. Shirguppikar, Nguyen Huu Phan,	Design of ER damper for recoil length minimization: A case study on gun recoil system	Journal of the Mechanical Behavior of Materials	1	1	177-185	2021-22	10	2.162		ISSN:03348938, 21910243
17.	Santosh patil, Shailesh Shirguppikar, Pham Van Dong	E?ect of boron carbide reinforcement on properties of stainless-steel metal matrix composite for nuclear applications	Journal of the Mechanical Behavior of Materials	1	1	390-397	2021-22	10	2.162		ISSN:03348938, 21910243 doi.org/10.1515/jmbm-2022-0047
18.	Kanhaiya Powar, Sharad Patil	Promoting Technology-Enhanced Project-Based Learning through Application of 3D Printing Technology for Mechanical Engineering Education	Journal of Engineering Education Transformation	35	Special Issue	85-96	2021-22	05
19.	Ansar Mulla, Abhijeet Shah	Numerical Theory to Practical Working Model Learning Approach	Journal of Engineering Education Transformation	35	Special Issue	69-78		05
20.	Maruti B Mandale Avadhut T Patil,	Recent acoustic energy harvesting methods and mechanisms: A review	Noise & Vibration Worldwide	52	1	-	2021-22	11			doi.org/10.1177/09574565211030702
21.	Maruti B Mandale Avadhut T Patil,	Generation of electric potential and noise suppression from an integrated system of acoustic energy conversion	Australian of Mechanical Engineering	Online First	-	Online First	2021-22	13	1.3		ISSN-14484846 doi.org/10.1080/14484846.2022.2073018
22.	Fahad M. Kazi C. A. Waghmare M. S. Sohani	Multi-objective optimization of the aluminum powder-mixed EDM process using the GRA and TOPSIS techniques based on the fuzzy AHP approach	Journal of Applied Research and Technolog	19	01	437-449	2021-22	30			ISSN:16656423
23.	Fahad M. Kazi C. A. Waghmare M. S. Sohani	Multi- objective optimization of machining parameters in hybrid powder-mixed EDM process by response surface methodology and normalized fuzzy logic algorithm.	International Journal on Interactive Design and Manufacturing	-	01	230-241	2021-22	24			ISSN:19552505, 19552513
24.	AbhishekKeripale and Samir Kumbhar	Analysis of impact energy absorption and dissipation capacity of different composite materials using numerical simulation	Materials Today: Proceedings	58	4	online	2021-22	47			ISSN:2214-7853 doi.org/10.1016/j.matpr.2021.12.196
25.	Prashant V.Gunjavate, Sanjaykumar  S Gawade, Sharad D.Patil	Design of Liquid Desiccant Dehumidifier to enhance the Indoor Air Quality	Materials Today: Proceedings	62	12	6793-6798	2021-22	47			ISSN:2214-7853
26.	Ranjit Anil Patil ,Santosh Rane,Samir Kumbhar	Static analysis of shape memory alloy (SMA) reinforced composite	Materials Today: Proceedings	62	12	6832-6836	2021-22	47			ISSN:2214-7853

Publication in Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Mrunal Uttam Patil, M. V. Kavade	Mechanical characterization of E-Glass/Epoxy composite with a filler material as Ceramic Powder	International journal of advance research, ideas and innovation in technology	7	6	163 - 166	2021-22	-	--	--	ISSN: 2454-132X
2.	Abhijeet Shah Amey Gaurvadkar	A case study on improvements of placement at rajarambapu institute of technology by various means of coaching and mentoring	National institute of personal management	1	4	273-281	2021-22	-	--	--	ISSN:0970-8405

Publication in Conference Paper

Sr.No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Akshay Patil, Samir Kumbhar, Ranjit Patil,	Frequency shift analysis of Shape Memory Alloy reinforced composite plate	International Conference on Innovation Challenges and Advances in Engineering & Technology: A road to selfreliant India	International	14-29	2021-22
2.	Omkar Kumbhar Samir Kumbhar, Ranjit Patil,	Study on damping behavior of SMA reinforced composite with elastomeric core	International Conference on Innovation Challenges and Advances in Engineering & Technology: A road to selfreliant India	International	15-28	2021-22
3.	Randhir Yashwant Chavan, Sharad D. Patil	Analysis of Flow & Heat Transfer Enhancement of Turmeric Cooking Steam Generator	International Virtual Conference on Innovation Challenges and Advances in Engineering & Technology (ICAET-2021) organized by Vishwaniketan's Institute of Management Entrepreneurship and Engineering Technology (ViMEET), Khalapur, from Mumbai University, Maharashtra	International	1-7	2021-22
4.	Appasaheb T. Kadam, Sharad D. Patil	Performance Analysis of Argemone Mexicana Biodiesel on VCR Diesel Engine	National Conference on Turbo machines, Energy and Combustion	National	20-30	2021-22
5.	Rohit J. Sutar, Sharad D. Patil.	Numerical analysis of heat transfer enhancement in metal hydride hydrogen storage reactor system using bio fluid	National Conference on Turbo machines, Energy and Combustion	National	62-73	2021-22
6.	Rahul Urunkar and Sharad Patil	Performance evaluation of multi-tubular sodium alanate hydride reactor by enhancing heat and mass transfer characteristics using nanofluids	26th National Heat and Mass Transfer Conference and the 4th International ISHMT - ASTFE Heat and Mass Transfer Conference (IHMTC-2021)	International	1-10	2021-22
7.	Kanhaiya Powar ,Sharad Patil	Promoting Technology-Enhanced Project-Based Learning through Application of 3D Printing Technology for Mechanical Engineering Education	International Conference on Transformations in Engineering Education (ICTIEE 2022)	International	292-304	2021-22
8.	Mandar Page, Kanhaiya Powar, Sharad Pati	Estimation of heat generation rate from 18650 Lithium-Ion Battery at Various Discharge Rates	National Conference in Mechanical Engineering: Advances in Materials and Design (NCMEAMD-2022)	National	1-8	2021-22
9.	R. G. Desavale, P.S. Salunkhe,S.V.Patil,S.A.Shinde	Compound Fault Diagnose of rotor Bearing System Using K-NN Machine Learning Approach	International Conference on Advancements in Design and Tribology (ICADT)	International	21-32	2021-22
10.	R. G. Desavale, Prasad Shinde	An Investigation of unbalanced in rotor bearing system using matrix method and experimental approach	International Conference on Advancements in Design and Tribology (ICADT)	International	18-29	2021-22
11.	R. G. Desavale, V,G Salunkhe	Experimental mathematical model for diagnosis of vibration generation in defective rolling element bearing.	International Conference on Advancements in Design and Tribology (ICADT)	International	16-27	2021-22
12.	Abhijeet Shah , Sukanya Patil	Next generation intelligent cold storage system based onIOT	Recent Advanced in engineering and technology	National	1-10	2021-22
13.	Abhijeet Shah Amey Gaurvadkar	Design and Development of Automotive Radiator for better cooling efficiency	Proceeding of the international conference & exposition on advances in mechanical engineering	International	1-10	2021-22
14.	S Shirguppikar, BT Long, MT Bich, LQ Dung	Experimental Investigation of the Influence of Processes Parameters on Z Coordinate in Micro EDM for Ti-6Al-4V	International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development	International	507-512	2021-22
15.	S Shirguppikar, Huu-Phan Nguyen, Tien-Long Banh	Performance Analysis of Copper Coated Aluminum Tool in Electrode Discharge Machining of Ti-6Al-4V Alloy	International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development	International	520-526	2021-22
16.	M.B.Mandale,S.S.Powar	Design and Development of a Rotary Torque Sensor	Proceeding of national conference on Recent advance in engineering and technology	National	294-302	2021-22
17.	M.B.Mandale,Shreyas Narvekar	Acoustic Matamaterial (AMMS)for Noise Reduction -Review	Proceeding of national conference on Recent advance in engineering and technology	National	267-278	2021-22
18.	B.R.Jadhav	Need of Hybrid electric two wheeler :Recent Development and Revolution Requirement on Indian Road	Emerging Trends in Electric-Mobility & Sustainable Development : Opportunities  & Challenges	National	1-10	2021-22
19.	AjinkyaK. Patil, Pruthviraj C.Chavan	Utilization of nearpod application to improve student participation in online CFD Laboratory course	Ninth International Conference Transformations in Engineering Education (ICTIEE 2022)	International	320-331	2021-22
20.	AjinkyaK. Patil, Pooja Salunkhe	Estimation of heat transfer of car radiator by using MATLAB ansys tool	Emerging Trends in Electric-Mobility & Sustainable Development : Opportunities  & Challenges	National	23-29	2021-22

Year 2020-21

Publication in H-Index Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Dr S.K.Patil, G.L.Suryawanshi, R. G. Desavale	Evaluation of the Mechanical and Tribological Characteristics of AA6061/TiB2 Metal Matrix Composite and Parametric Optimization of Its Casting Process by  using TAGUCHI Technique and NSGA-II	International Journal of Materials Engineering Innovation	4	2	207-233	2020-21	10	--	--	ISSN:1757-2762
2.	Dr S.K.Patil G.L.Suryawanshi	Impact of Choice based four tracks project system on development of final year Engineering students and challenges faced during implementation: Case Study”.	Journal of Engineering Education and Transformations	34	01	25-37	2020-21	5	--	--	ISSN:2394-1707
3.	Dr S.K.Patil R V Pawar	Structured approach  enhanced quality of undergraduate capstone project : A case study	Journal of Engineering Education and Transformations	34	---	607-615	2020-21	5	--	--	ISSN:2394-1707
4.	Dr S.K.Patil	A review on actuator and manipulator technique in soft robotics	Lecture Notes in Electrical Engineering	200	01	123-135	2020-21	33	--	--	ISSN:18761100, 18761119
5.	Dr. S. M. Sawant	Numerical study glass epoxy composite drive shaft for light motor vehicles	API Conference Proceedings	2341	01	020007-1-09	2020-21	75	--	--	ISSN:0094243X, 15517616
6.	Dr R. G. Desavale, P. M. Jadhav	Distributed fault diagnosis of rotor-bearing system using dimensional analysis and experimental methods	Elsevier- Measurement: Journal of the International Measurement Confederation	166	01	108239(1-12)	2020-21	91	4.072	---	ISSN:0263-2241
7.	Dr. R. G. Desavale	An overview of dynamic modeling of rolling-element bearing	Noise and Vibration Worldwide	01	01	1-16	2020-21	14	--	--	doi.org/10.1177/0957456520948279
8.	Dr. R. G. Desavale	Roller Element Bearing Fault Size Estimation Using Adaptive Neuro-fuzzy Inference System (ANFIS)	ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering	07	01	011001-1-10	2020-21	13	--	--	DOI: https://doi.org/10.1115/1.4048656
9.	Dr.R. G. Desavale	Experimental Frequency-Domain Vibration Based Fault Diagnosis of Roller Element Bearings using Support Vector Machine	ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering	07	02	1-7	2020-21	13	--	--	doi.org/10.1115/1.4048770
10.	B.R.Jadhav	Implementation of topsis optimization  technique in comparative analysis of convention TIG and activated TIG welding of stainless steel 304L	International Journal of  material Engineering Innovation	4	2	955-961	2020-21	10	--	--	ISSN:2395-4396
11.	M.V.Pisal, Dr.S.S.Gawade	Experimental investigation and multiobjective optimization of pin mill for pulverising Jaggeryusing Grey Relational Analysis	Solid state technology	63	6	4319-4338	2020-21	25	0.053		ISSN:038111X
12.	M.V.Pisal, Dr.S.S.Gawade	Multiobjective Optimization for dehydration of Jaggery in Vacuum dryer by Grey Relational Analysis	International Journal of Advanced science and Technology	29	11	3023-3037	2020-21	15	--	--	ISSN:2207-6360
13.	Dr.S B Kumbhar	Drum brake noise reduction	International Journal of vehicle Noise and vibration	16	1	58-63	2020-21	16	--	--	ISSN:14791471, 1479148X
14.	R.A.Patil Dr.S B Kumbhar,	Investigation on dynamic behaviour of shape memory alloy (sma) wire embedded composite	IOP conference series : material science and engineering	1136	01	1-11	2020-21	44	--	--	Doi:10.1088/1757-898X/1136/1/012024
15.	Dr.S.D.Patil	Enhancement of heat and mass transfer characteristic of metal hydride reactor for hydrogen storage using various nanofliuds	International Journal of hydrogen energy	3199	01	1-12	2021-20	215	5.390		ISSN:03603199
16.	Dr.A P Shah	Integral revision in semester examination and evolution of content techniques	Journal of Engineering Education and Transformations	34	01	319-325	2020-21	5	--	--	ISSN:2394-1707
17.	P M Jadhav	Increasing student engagement during virtual classroom  teaching through effective use of online tools	Journal of Engineering Education and Transformations	34	01	44-51	2020-21	5	--	--	ISSN:2394-1707
18.	C.A.Waghamare	Optimization and comparatively analysis  of silicon and chromium powder mixed EDM process by TOPSIS technique	Engineering  and applied science Research	48	2	1-10	2020-21	5	--	--	ISSN:25396161, 25396218
19.	P. S. Jadhav	An optimal approach for improving the machinability of Nimonic C-263 superalloy during cryogenic assisted turning	Journal of Manufacturing Processes- Elsevier	58	-	693- 705	2020-21	53	4.716	--	ISSN:15266125
20.	P. S. Jadhav	Simulation and Experimental investigation of tool wear rate in dry and near dry EDM process	World Journal Engineering	1708	01	23-37	2020-21	9	--	--	ISSN:17085284
21.	P. S. Jadhav	Design and analysis of modify four stroke four revolution  engine	IOP conference series : material science and engineering	1123	01	012043-1-10	2020-21	44	--	--	ISSN:17578981, 1757899X
22.	S.S. Shirguppikar	Experimental investigation on micro-electro discharge machining process using tungsten carbide and titanium nitride-coated micro-tool electrode for machining of Ti-6Al-4V	Advances in Materials and Processing Technologies - Taylor & Francis	01	01	1-18	2020-21	9	--	--	ISSN:2374068X, 23740698
23.	S.S. Shirguppikar	Accessing effect of uncoated and coated electrode on response variables in electric discharge machining for TI-AL-4V Titanium alloy	Tribology in Industry	43	04	524-534	2020-21	23	--	--	doi.org/10.24874/ti.1020.12.20.03
24.	S.S. Shirguppikar	Multi-objective optimization of EDM by taguechi DEAR method using ALCrNi Coated electrode	International Journal of Advances manufacturing technology	116	05	1429-1435	2020-21	124	--	--	doi.org/10.1007/s00170-021-07032-3
25.	S.S. Shirguppikar	Tool Wear analysis uncoated and ALCrNi coated aluminum electrode in EDM for TI-AL-4V titanium alloy	Lecture note in network and system	178	01	832-838	2020-21	14	--	--	doi.org/10.1007/978-3-030-64719-3-91
26.	S.S. Shirguppikar	Material remove rate in electric discharge machine with aluminum tool electrode for Ti-6A1-4V titanium alloy	Lecture note in network and system	178	01	527-533	2020-21	14	--	--	doi.org/10.1007/978-3-030-64719-3-58
27.	S.S. Shirguppikar	Performance analysis of multi waal cabon nanotubes coated tool EDM of titanium alloy	International  manufacturing science and engineering conference ( ASME)	8224	01	1-7	2020-21	06	--	--	doi.org/10.1115MSEC2020-8224
28.	S.N.Jalwadi	Modeling of progressive damage in concrete using Multidimensional virtual bond method	International Journal of numerical and analytical methods in Geomechanics	45	02	157-175	2020-21	91	--	--	DOI: 10.1002/nag.3136
29.	R .A. Magdum	A critical review of incremental sheet forming in view of process parameters and process output	Advances in Materials and Processing Technologies	--	--	1-9	2020-21	9	--	--	ISSN 2374068X, 23740698

Publication in Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	M.V.Pisal, Dr S.S.Gawade	Mathematical model for thin layer vacuum drying kinetics of Jaggery	Indian Journal of Sugarcane Technology	35	01	16-18	2020-20	-	-	-	0970-3233
2.	M.V.Pisal, Dr S.S.Gawade	Design ,development and optimization of manufacturing process for free flow jaggery powder	Indian Journal of Sugarcane Technology	35	01	16-18	2020-20	-	-	-	0970-3233
3.	Dr S.S.Gawade	Design and development of liquided desiccant dehumidifier for air conditioning (LDAC)System	International Journal of Engineering Applied Sciences and Technology	01	08	1-6	2020-21	-	-	-	ISSN No. 2455-2143
4.	Dr S.S.Gawade	development of Gearbox for submersible mixer	International Journal of Engineering Applied Sciences and Technology	05	05	170-175	2020-21	-	-	-	ISSN No. 2455-2143
5.	Dr S.S.Gawade	Life prediction of an automobile component under variable amplitude loading	International Journal of Engineering Applied Sciences and Technology	01	08	1-6	2020-21	-	-	-	ISSN No. 2455-2143
6.	Dr S.S.Gawade	Wear analysis of  varies tempered sample of stainless steel 420B	International Journal of Engineering Applied Sciences and Technology	05	05	67-71	2020-21	-	-	-	ISSN No. 2455-2143
7.	Dr S.S.Gawade	Design and development of electromagnetic vibration absorber	International Journal of Engineering Applied Sciences and Technology	01	08	37-44	2020-21	-	-	-	ISSN No. 2455-2143
8.	Dr.S.D.Patil	Selection and development of crankcase ventilation system for BS (CEV) IV of high way engine	International research  Journal of engineering  and Technology	07	10	1010-1016	2020-21	-	-	-	ISSN-2395-0056
9.	Dr.S.D.Patil	Numerical comparative study of wall share stress in coronary artery bypass grafting	International  Journal of scientific research and engineering  development	02	05	820-827	2020-21	-	-	-	ISSN-2581-7175
10.	Dr.S.D.Patil	Controlling the Growth of Sugarcane Plant in the Nursery During Germination Process by Detecting and Changing Temperature and Humidity through IoT - A Review	International Research Journal of Engineering and Technology (IRJET)	8	8	669-676	2020-21				e-ISSN: 2395-0056
11.	Dr A. P Shah S.B.Khot	Challenges faced by Fresh Graduates in COVID-19 pandemic with regard to Internship and Placement	Journal of National Institute of Personal Management	07	02		2020-21	-	-	-	ISSN NO. 2347-8039
12.	Dr A. P Shah	Crash Analysis of Truck Cabin Structure at a speed of 60 KMPH	International Research Journal of Engineering & Technology	07	10	891-893	2020-21	-	-	-	ISSN No. 2395-0072
13.	Dr A. P Shah	Engine Performance and Engine Characteristics for a blend of Petrol and Ethanol with Hydrosxy Gas	International Research Journal of Engineering & Technology	07	10	897-902	2020-21	-	-	-	ISSN No. 2395-0072
14.	M. V. Kavade	Design and Development of Pick and Place Gantry System on Conveyor	International Research Journal of Engineering and Technology	7	7	131-135	2020-21	-	--	--	e-ISSN: 2395-0056, p-ISSN: 2395-0072
15.	Dr. R. G. Desavale, G.L.Suryawanshi,	A study on wear behavior of AA6061/ZrB2 composites by using pin on disc	International journal of Engineering applied science and Technology	5	5	91-94	sept-2020	6	--	--	ISSN:2455-2143
16.	Dr.R. G. Desavale	The different adaptive algorithms for active vibration control of automotive component	International Journal of Engineering Applied Sciences and Technology	5	5	72-77	2020-21	6	--	--	ISSN:2455-2143,
17.	Dr.R. G. Desavale	Design and development of mobile milk chiller	International Journal of Engineering Applied Sciences and Technology	5	5	288-291	2020-21	6	--	--	ISSN:2455-2143,
18.	S.N.Jalwadi	Development of vibratory cavitations erosion test setup and its qualification	International Journal of Engineering Applied Sciences and Technology	5	5	203-208	Sept-2020	6	--	--	ISSN No. 2455-2143
19.	Dr. S. B. Kumbhar	Finite Element Analysis of Saddle Support for Stack Heat Exchanger	International Journal of Engineering Applied Science and Techonology	5	5	78-85	2020-21				ISSN No. 2455-2143
20.	Dr. S. B. Kumbhar	Vibration Analysis for Fault Detection of Fluctuating Cutting Tool by Experimentally and Analytically.	International Journal of Engineering Applied Science and Techonology	5	5	78-85	2020-21				ISSN No. 2455-2143
21.	S. R. Patil	Analysis of the Tribological Behavior of Tempered SS 420B Sample at Different Temperature.	Innovative Journal for Opportunities and Development in Science and Techonology	1	5	1-7	2020-21				ISSN 2582-6026
22.	M. M. Mirza	Circular and Non-Circular Shaped Composite Component of Fiber Reinforce Epoxy Resin Material Under Loading Condition.	International Journal of Engineering Applied Science and Techonology	5	5	78-85	2020-21				ISSN No. 2455-2143
23.	M. M. Mirza	Analysis of Sugar Mill Headstock.	International Journal of Engineering Applied Science and Techonology	5	5	217-22	2020-21				ISSN No. 2455-2143
24.	M. M. Mirza	Structural analysis of cylindrical shaped composite and traditional non composite material	International Journal of Engineering Applied Sciences and Technology,	5	5	349-351	2020-21				ISSN No. 2455-2143

Publication in Conference Paper

Sr.No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Dr S.S.Gawade	State of art literature review on carryover in liquid desiccant dehumidification system	Innovation in process and system design	National	52-61	2020-21
2.	Dr A.P.Shah	Design, analysis and experimental study of worm and worm gear pair for plug valve application	at International Conference on Recent Trends in Mechanical Engineering (ICRTME	International	1-7	2020-21
3.	Dr. S. S. Gawade	Design and Analysis of dual worm self Locking lifter	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-3	2020-21
4.	Dr. R. G. Desavale	Investigation of the effect of the number of rolling elements on vibration characteristics of cylindrical roller bearing.	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-5	2020-21
5.	Dr.S. S. Gawade	Identifying New Process for Cylinder Head Thermal Calibration.	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-4	2020-21
6.	Dr. Samir Kumbhar	Static Analysis of SMA Composite by FEA	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-7	2020-21
7.	Dr. Samir Kumbhar Prof. Ranjit Patil	Frequency shift Analysis of SMA Reinforced composite plate.	International Conference on Innovation Challenges and Advances in Engineering and Technology. ViMEET  Khalapur.	International	1-5	2020-21
8.	Dr. M. B. Mandale	Design and Development of a Rotary Torque Sensor	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-5	2020-21
9.	Dr. Samir Kumbhar Prof. Ranjit Patil	Study on Damping Behavior of SMA Reinforced Composite with Elastomeric Core.	International Conference on Innovation Challenges and Advances in Engineering and Technology. ViMEET  Khalapur.	International	1-5	2020-21
10.	Dr. Samir Kumbhar	Experimental and analytical analysis of SMA reinforced composite with elastomeric core	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-4	2020-21
11.	Dr. M. B. Mandale	Acoustic Meta-materials (AMMS) for noise reduction - Review	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-5	2020-21
12.	Dr. R. G. Desavale	Roller Bearing Fault Detection Using Vibration Parameter.	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-4	2020-21
13.	Prof. M. M. Mirza	Design and Development of Roller Belt Conveyor for Weight Reduction.	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-5	2020-21
14.	Dr. S. R. Patil	Review Paper Synthesis of Bio-Lubricants from Nao-Edible oil	International Conference on Nanotechnology and Smart Materials , Design Artificial Intelligence Manufacturing and Engineering (ICNSMDAIME-21)	International	60-62	2020-21
15.	Dr. S. R. Patil	Synthesis of Bio-Lubricants Using Jatropha oil	National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021	National	1-4	2020-21

Year 2019-2020

Publication in H-Index Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Dr. S. M. Sawant	Optimization of glass epoxy composite driveshaft for light motor vehicles using fuzzy logic technique	Australian journal of mechanical engineering	17	03	1-12	2019-20	09	-	-	doi.org/10.1080/14484846.2019.1679004
2.	Dr. S. M. Sawant	Effect of oxy-hydrogen blending with gasoline on vehicle performance parameters and optimization using response surface methodology	Journal of the Chinese Institute of Engineers	42	07	553-564	2019-20	28		-	ISSN 0253 3839 doi.org/10.1080/02533839.2019.1638305
3.	Dr.S.K.Patil,  R.V. Pawar	Adoption of the Conceive-Design-Implement-Operate approach to the Third Year Project in a team-based design-build environment	Procedia of Computer science	172	-	559-567	2019-20	59	-	-	DOI: 10.1016/j.procs.2020.05.068
4.	Dr.S.K.Patil	Energetic teaching activity Role play and round quiz: A case study	Journal of Engineering Educations Transformation	3	1	84-90	2019-20	03	-	-	ISSN: 2394 - 1707
5.	Dr.S.K.Patil,  R.V. Pawar	Project Based Learning: An Innovative Approach for Integrating 21st Century Skills	Journal of Engineering Education Transformations	33	4	58-63	2019-20	3	-	-	ISSN 2349-2473, eISSN 2394-1707
6.	Dr S.S.Gavade	Design and analysis of hydrostatic transmission (HST)system for off-highway vehicle	SAE Technical Papers				2019-20	104	-	-	ISSN 0148-7191, eISSN 2688-3627
7.	R.V. Pawar	Evolving Product Development Skills Through Group Based Activity Instructions in Engineering Exploration Course	Procedia of Computer science	172	-	314-323	2019-20	59	-	-	DOI: 10.1016/j.procs.2020.05.051
8.	Dr.R G Desavale	Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory	Measurement	161	-		2019-20	70	-	-	https://doi.org/10.1016/j.measurement.2020.107846
9.	Dr. A P. Shah	Numerical and Experimental investigation of thermal energy storage in a conical finned tube in PCM storage unit	Journal of Mechanical Engineering	16	03	51-65	2019-20	05	-	-	ISSN 1823- 5514,
10.	Dr. A P. Shah	Buoyancy-aided conjugate mixed convection with surface radiation from a vertical channel with multiple non-identical discrete heat sources	International Journal for Computational Methods in Engineering Science and Mechanics	20	06	1-14	2019-20	19	-		doi.org/10.1080/15502287.2020.1718799 ISSN: 1550-2287
11.	Dr. A P. Shah	Synthesis and Characterization of Nano-grease for Automotive Wheel Bearing Application”, Advances in Applied Mechanical Engineering	Advances in Applied Mechanical Engineering	-	-	413-422	2019-20	08	-		doi.org/10.1007/978-981-15-1201-08-47
12.	Dr. A P. Shah	preparation characteristic of biodiesel extractic from acidic oil:A by product of soyabean oil refining process	Lecture notes in mechanical engineering	-	-	479-489		12			doi.org/10.1007/978-981-15-2662-6-44
13.	Dr.M.B.Mandale	Experimental Investigation of different fiber orientation on damping loss factor of fiberglass composite specimens.	Materials today: Proceedings	18	-	2214-7853	2019-20	18	-	-	doi.org/10.1016/j.matpr.2019.11.208
14.	Dr.M.B.Mandale	Estimation of coupling loss factor for rectangular plates with different material and junction	Noise and Vibration Worldwide	59	9-11	306-312	2019-20	13	-	-	doi.org/10.1177/0957456519883264
15.	M. V. Kavade	Application of metal powder to improve metal removal rate in Electric Discharge Machining	Materials Today: Proceedings	16	-	398-304	2019-20	18	-	-	ISSN 2214-7853
16.	M. V. Kavade	An effective use  of visual aids for teaching computer aided manufacturing (CAM) laboratory –A case study	Journal of Engineering Education Transformations	3	1	1-6	2019-20	03	-	-	ISSN: 2349-2473
17.	P. S.Jadhav  S. S. Shirguppikar	Cryogenic Treatment of Nimonic Alloys- hard Turning: State -of-the-art, challenges and future directions	Materials today: Proceedings	18	-	4120-4132	2019-20	18	-	-	ISSN 2214-7853
18.	C.A Waghmare, S.S.Shirguppikar	Investigation of an effect of Silicon and aluminum powder PMEDM on surface integrity of AISI D2 steel	International Journal of Mechanical Engineering and Technology	10	8	137-149	2019-20	13	-	-	ISSN 0976-6340
19.	S. S. Shirguppikar,	A comparative performance study of Dry and near Dry EDM Process in Machining of spring steel material	Materials today: Proceedings	18	-	5247-5257	2019-20	18	-	-	ISSN 2214-7853
20.	P. S.Jadhav	Study of the Effect of Cryogenically treated tools during Rapid Drill Electro-discharge machining of Ti-6Al-4V alloy	Materials today: Proceedings	18	-	3122-3127	2019-20	18	-	-	ISSN 2214-7853
21.	P. S.Jadhav	Effect Of Surface Treatments On Super capacitive Performance Of SnO2-RuO2 Composite Thin Films	Materials today: Proceedings	18	-	2848-2858	2019-20	18	-	-	ISSN 2214-7853
22.	BR Jadhav, S.S. Shirguppikar	Experimental Investigation of Various Process Parameters of Powder Mixed Electro Discharge Machining Process for Machining of Al-Si Alloy	International Journal of Mechanical Engineering and Technology (IJMET)	10	8	127-138	2019-20	13	-	-	ISSN 0976-6340
23.	P.M.Jadhav	Optimal Forwarder Selection based on the Fuzzy TOPSIS MCDM method in Opportunistic routing protocol to enhance the performance of the MANET	International Journal of Future Generation Communication and Networking	12	2	23-36	2019-20	01	-	-	ISSN 2207-9645 Doi.org/10.33832/ijfgcn.2019.12.2.03
24.	P.M.Jadhav, P. S.Jadhav, S.B.Khot	Assessing the effectiveness of a hybrid PPBL model of delivering Workshop Practice course for the first-year engineering students	Journal of Engineering Education Transformations	33	-	510-515	2019-20	03	-	-	ISSN:2349-2473
25.	P.M.Jadhav	Effective Use of Online Tools to Prepare Students for Competitive Examinations	Journal of Engineering Education Transformations	33	-	93-98	2019-20	03	-	-	ISSN:2349-2473
26.	P.M.Jadhav, P. S.Jadhav, S.B.Khot	Teaching Engineering Design module from Engineering Exploration and Design Project (EEDP) course through hands on activities	Journal of Engineering Education Transformations	33	-	11-18	2019-20	03	-	-	ISSN:2349-2473
27.	A.M.Mulla	Startup Entrepreneurship Support for Design & Development of Problem Statement	Journal of Engineering Education & Transformation(JEET)	33	-	32-39	2019-20	03	-	-	ISSN:2349-2473
28.	Dr.S.S Gawade, Dr.S R Patil, Dr.R G Desavale	An Experimental investigation of Electro rheological fluid damper recoil system used in heavy duty application	ASME International Mechanical Engineering Congress and Exposition (Conferences and Proceedings)			104-109	2019-20	29	-	-	https://doi.org/10.1115/IMECE2019-10424

Publication in Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1	Dr. S. M. Sawant	Investigation on glass-epoxy composite drive shaft for light motor vehicle	International Journal of Design Engineering	09	1	22-35	2019-20	-	-	-	-
2	Dr.M.B.Mandale	A performance study on indirect acoustic flow resistivity measurement methods	Journal of Noise theory and practice	-	-	7-17	2019-20	-	-	-	-
3	Dr.S.D.Patil	Numerical Analysis of heat transfer enhancement in artificially roughened solar air heater	Springer Processing	2	-	297-303	2019-20	-	-	-	Doi.org/10.1007/987-981-15-2662-6-28
4	B.R.Jadhav	Review paper of dry machining	International Journal of science and technology	6	7	11-18	2019-20	-	-	-	ISSN: 2349-784X
5	S.V. Kadam	Heat Transfer Enhancement by the Usage of Low Concentration MgO-Water Nanofluid	International Journal of Engineering and Advanced Technology (IJEAT)	9	1	1985-1990	2019-20	-	-	-	ISSN: 2249 – 8958
6	Dr.R G Desavale	Modeling, attenuation and fow feld analysis of diesel engine muferusing fuid structure interaction approach and experimental analysis	SN Applied Sciences	--	-	1-11	2019-20		-	-	|https://doi.org/10.1007/s42452-020-2683-6

Publication in Conference Paper

Sr.No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Dr.S.K.Patil,	Critical Overview on optimization techniques of friction stir welding of aluminum alloy	International Conference on Industrial Engineering (ICIE-2019)	International	793-799	2019-20
2.	Dr.S.K.Patil,  R.V. Pawar	Adoption of the Conceive-Design-Implement-Operate approach to the Third Year Projection a team-based design build environment	9th world Engineering Education Forum (WEEF - 2019)	International	1-9	2019-20
3.	Dr.S.K.Patil P. A. Patil,	Nano-particle Based Cutting Fluid Applied in Minimum Quantity Lubrication Method for Machining: A Review	International Conference on International Engineering 2019	International	771-778	2019-20
4.	Dr.S.K.Patil P.C. Chavan, , A.K. Patil	Taguchi based optimization of machining of AISI 4140 steel by TOPSIS approach	International Conference on Industrial Engineering (ICIE-2019)	International	587-590	2019-20
5.	Dr.S.S.Gavade	Characterization of Mechanical Properties of different agro derived reinforced aluminum alloy matrix composite: review	International conference on Machines and Mechanisms	International		2019-20
6.	P.C.Chavan, M.L.Deshpande , A.K. Patil	Improving Practical Skill in metrology and quality control by TTSM	ICTIEE 2020	International	1-3	2019-20
7.	A.K. Patil P.C. Chavan	“ABDP: Activity Based Approach to Develop Students Conceptual Understanding of the Course Recycling and Regeneration Technology”	ICTIEE 2020	International	202	2019-20
8.	Dr. A. P. Shah	Crash Pulse and its Severity on Automotive Seats	7th  International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019)	International	1-5	2019-20
9.	Rajendra Pawar	Evolving Product Development Skills Through Group Based Activity Instructions in Engineering Exploration course	9th world Engineering Education Forum (WEEF - 2019)	International	1-10	2019-20
10.	P.M.Jadhav	QoS based Routing using the Fuzzy TOPSIS MCDM method to enhance the performance of the MANET	International Conference for Convergence in Technology 2019	International		2019-20
11.	P.M.Jadhav	Effective use of videos in classroom teaching for internet technology lab course	National Conference on Exploring new dimensions in teaching learning for quality education	National	93-97	2019-20
12.	M.V.Pisal	Failure Mode & Effect Analysis of spring Salvage Process	QUEST 2K19	National	1-5	2019-20
13.	S. S. Shirguppikar	Grey Fuzzy Multiobjecive Optimization of Process Parameters for Dry Electro Discharge Machine Process.	International Conference on  Recent Advances in Materials  and Manufacturing	International		2019-20
14.	S.B.Khot	Sustainable and resilient supply chain practices in Indian automotive industry: A review	International Conference on Operations Research and Decision Sciences 2019	International		2019-20
15.	S.B.Khot	Framing enablers, barriers and risks to build sustainable-resilient supply chain: Indian automotive perspective	International Conference on Operations Research and Decision Sciences 2019	International		2019-20

Year 2018-19

Publication in H-Index journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No./DOI no.
01	Dr.R.G.Desavale	Dynamics Characteristics and Diagnosis of a Rotor-Bearing's System through a Dimensional Analysis Approach: An Experimental Study	ASME-Journal of computational and nonlinear dynamics	14	01		2018-19	37	1.996	-	Doi: 10.1115/1.4041828
02	S.R.Patil Dr.S.S.Gavade	Performance characterization and selection of electrorheological fluid for damper useful for recoil minimization in heavy-duty application	International journal of mechanical engineering and technology	10	02	1059	2018-19	11	-	-	ISSN:0976-6359
03	Dr.S.S.Gavade	Numerical analysis of femur bone by using finite element method	Series on Biomechanics	32	03	56-62	2018-19	03			ISSN 1313-2458
04	S. B. Khot	Resilience and sustainability of supply chain management in the Indian automobile industry	International journal of data network science	-	03	339-348	2018-19	06	-	-	Doi:10.5267/j.ijdns2019.4.002
05	P. S.Jadhav	Electrochemical properties of chemically synthesized SnO2-RuO2mixed film	Material for renewable and sustainable energy	08	01	5-11	2018-19	12	-	-	Doi:.org/10.1007/s40243-018-0138-4
06	Dr.S.D.Patil, R.V.Pawar Dr.A.P.Shah	Experimental Analysis of effect of mixed Biodiesel Blends on Performance, Combustion and Emission of Variable Compression Ratio Engine.	Modeling ,Measurement and Control C	08	1	24-31	2018-19	06			Doi:.org/10.18280/mmc c.800105

Publication in Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Dr.S.M Sawant	Numerical analysis of solar air heater using CFD	Journal of emerging technology and innovation research	6	4	461-466	2018-19	-	-	-	ISSN:23495162
2.	Dr.S.S.Gavade	Experimental stress analysis of worm wheel used crate washer gear box	International research  journal of engineering and  technology	6	6	2180-2185	2018-19	-	-	-	ISSN:2395-0056
3.	Dr.A.P.Shah	Enhancement of heating surfaces area in steam boiler:-A review	Journal of mechanical and civil engineering	-	-	44-47	2018-19	-	-	-	ISSN:2320-334X
4.	Dr.A.P.Shah	A survey on Automotive seat and factors affecting its design	International journal of innovative research in science, engineering and technology	08	04	4497	2018-19	-	-	-	ISSN:2319-8753
5.	Dr.A.P.Shah	Numerical Analysis of heat transfer for various shapes of dimple surfaces	Journal of emerging technology and innovative research	06	04	544	2018-19	-	-	-	ISSN:2349-5162
6.	P. S. Jadhav, P. M.  Jadhav S.B. Khot	A novel approach towards first year engineering workshop practice course with combination of project and product based learning (PBL) for improved and joyful learning.	Journal of Engineering Education & Transformation	-	-	-	2018-19	-	-	-
7.	S.R.Patil	Enhancing Productivity of Special Purpose Machine by Application of Automation to Loading and Unloading Utilizing Programmable Logic Controller.	International Journal of Emerging Technologies and Innovative Research	06	05	658-665	2018-19	-	-	-	ISSN:2349-5162
8.	B.R.Jadhav	Experimental investigation of cryogenic machining of EN-19 steel	Journal of emerging technologies and innovative research	06	04	634	2018-19	-	-	-	ISSN:2349:5162
9.	B.R.Jadhav, S.S Shirguppikar	Performance investigation of powder mixed electro discharge machining of hydro eutectic AL-Si alloy using brass electrode.	International journal of materials forming and machining processes.	06	02	31	2018-19	-	-	-	Doi: 10.4018/ijmfpm.2019070103
10.	C.A.Waghmare	Design of Lean Manufacturing.	International journal of research in advent technology	-	-	40	2018-19	-	-	-	ISSN:2321:9637
11.	R.A. Magdum	Material Based FEA Analysis of a Go-Kart Chassis: A Comparative Study	Advanced Engineering Forum	31	-	11-25	2018-19	-	-	-	ISSN: 2234-991X
12.	S.V.Kadam	Performance evaluation of automotive radiator by using Hybrid nano fluid based coolant.	International Journal of Management , Technology And Engineering	9	6	346-350	2018-19	-	-	-	ISSN : 2249-7455

Publication in Conference Paper

Sr.No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Dr.S. K. Patil	Toward Outcome Based Education (OBE): An Impact of Active Learning Approach for ‘Computer Organization’ Course	The sixth international conference on transformations in engineering education 2019	International	1-4	2018-19
2.	Dr. S. K. Patil P. A. Patil,	Effective Use of Microsoft Excel for Teaching Application Oriented Transportation Problems	The sixth international conference on transformations in engineering education 2019	International	1-5	2018-19
3.	Dr.S. K. Patil , R. V.  Pawar	Project based learning: an innovative approach for integrating 21st century skills	The sixth international conference on transformations in engineering education 2019	International	1-3	2018-19
4.	P. C .Chavan, Dr. S. K. Patil	ABDP: The Shop Floor Experience to Improve Students' Conceptual Understanding of the Course Metrology & Quality Control	The sixth international conference on transformations in engineering education 2019	International	1-4	2018-19
5.	Dr.S.S.Gawade	Investigation of strength of butt welded joint in ship structure Sic and CNT nanoparticle as filler material using FEA	1st International conference on Materials science and Engineering	International	851-860	2018-19
6.	Dr.S.S.Gawade	Development of over molded panel Air filter for secondary filter application	International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -65	International	542-547	2018-19
7.	Dr.S.S.Gawade	Fatigue life of Axle beam die	International conference on Automation Science and Engineering	International	47-50	2018-19
8.	Dr.S.S.Gawade	Tribo-corrosion behavior of Nitronic -50 stainless steel in nitric acid solution	International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -65	International	534-541	2018-19
9.	Dr.S.S.Gawade	Design and Analysis of Hydrostatic Transmission (HST) system for OFF-Highway vehicle.	International Conference on Intelligent Transportation System	International
10.	Dr.S.M. Sawant	Prediction of primary atomization of urea water spray using converge CFD	International conference Convergent Science	International	1-5	2018-19
11.	Dr.S.M. Sawant	A caparisons of prediction of primary automation of urea water spray using major commercial CFD codes	National conference on recent trends in engineering and technology	National	1-6	2018-19
12.	Dr.S.M. Sawant	Cooling load calculation procedure for homemade ice cream maker	Nation conference on recent trends in engineering and technology	National	10-16	2018-19
13.	M.V. Kavade	Process Parameter analysis of powder mixed WEDM for surface Roughness and Material Removal Rate using Analysis of variance Technique.	NCRTME	National	48	2018-19
14.	M.V. Kavade	Optimization of process parameters of powder mixed WEDM using grey relational analysis technique.	International conference on recent innovation &Developments in mechanical engineering.	International		2018-19
15.	M.V. Kavade	Design and performance analysis of air cooled heat exchanger for hydraulic power pack.	International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -105	International	683-698	2018-19
16.	Dr.S.D.Patil	A Review on thermal analysis of Nano particle based fluid-	International Conference on recent advances in materials Manufacturing and Energy system. Paper ID-TE028	International	1-7	2018-19
17.	Dr.S.D.Patil	Techno-economic analysis of the solar, wind and hybrid systems	proceedings of the national conference on emerging trends in mechanical engineering(NCETME-2019)	National	--	2018-19
18.	Dr.S.D.Patil	Design and analysis of oven for heat loss used for drying panted three wheeler chassis	1st International conference on Materials science and Engineering	International	--	2018-19
19.	M.B.Mandale	Evolution of effect of fiber orientation on the modal density of composite plates using ANSYS ACP Tool	1st International conference on Materials science and Engineering	International	408-420	2018-19
20.	M.B.Mandale	Study on the effect of geometry change after treatment outlet pipe on its weld and fatigue life.	1st International conference on Materials science and Engineering	International	523-533	2018-19
21.	M.B.Mandale	Vibration and noise reduction of machines by statistical energy Analysis.	1st International conference on Materials science and Engineering	International	--	2018-19
22.	M.B.Mandale	Investigation of sound pressure level of front-loaded washing machine by using numerical method.	1st International conference on Materials science and Engineering	International	587-594	2018-19
23.	M.B.Mandale	Development of Fixture for testing Emission conformance of Three Wheeler Vehicles according to B. S. - VI Norms on a chassis Dynamometer Test Rig.	International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -114	International	788-803	2018-19
24.	M.V.Pisal	Failure Mode and Effect Analysis of Spring Salvage Process.		International	--	2018-19
25.	Dr.R.G.Desavale	Dimensional and experimental analysis of rolling element bearing based on distributed defects.	1st International conference on Materials science and Engineering	International	--	2018-19
26.	Dr.R.G. Desavale	Computational fluid dynamics Analysis of various types of shell and tube heat exchanger.	International Conference on automation science and engineering	International	44-49	2018-19
27.	Dr.R.G. Desavale	Finite Element stress analysis of NTIW heat exchanger.	International Conference on automation science and engineering	International	50-55	2018-19
28.	Dr. R. G. Desavale	Reciprocal questioning (ReQuest) procedure for group learning	National Conference on Exploring New Dimensions in Teaching for Quality Education	National	90-92	2018-19
29.	Dr. R. G. Desavale	Tribo-Corrosion Behaviour of  Nitronic -50 Stainless Steel In Nitric Acid Solution.	International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -80	International	522-541	2018-19
30.	Dr. A. P. Shah	Enhancement of capacity steam production in bagasse fired steam boiler	international conference on recent advances in material manufacturing and energy systems-2019	International	1-5	2018-19
31.	Dr.A.P.Shah	Synthesis and characterization of Nano-Grease for automotive wheel bearing application	ICAMER2019 Warangal	International	65-69	2018-19
32.	S.V.Kadam , A. B. Chougule	CFD study of Propeller blade temperature for pusher-configured turbo-Prop Engine.	THERMACOMP2018	International	468-473	2018-19
33.	S.V.Kadam	Numerical Investigation on thermo-hydraulic performance of tube with wire coil Inserts.	THERMACOMP2018	International	900-904	2018-19
34.	S.V.Kadam	Numerical Analysis and optimization of thermo-Hydraulic performance in tube provided with thin wire rib roughness by Taguchi Approach.	THERMACOMP2018	International	668-673	2018-19
35.	S.V.Kadam	Effect of Nano fluid in heat transfer enhancement: A Review.	International Conference International Journal of Scientific Research and Review	International	614-618	2018-19
36.	S.R.Patil	CAD Customization of Hydraulic cylinder”	1st International conference on Materials science and Engineering	International	413-424	2018-19
37.	S.R.Patil	Enhancing Productivity of Special Purpose Machine By Application of Automation to	International conference on Automation Science and Engineering	International	40-30	2018-19
38.	S.R.Patil	Fatigue Life Evaluation of Agitator Notch Filter Dryer	International conference on Automation Science and Engineering	International	37-39	2018-19
39.	S. B. Khot, P. S.Jadhav	Delivery of an Elective Course by Blending Innovative Pedagogy Techniques and Measurement of Its Impact on Performance of the Students	The sixth international conference on transformations in engineering education 2019	International	1-4	2018-19
40.	S.  B. Khot	Design of sliding unit in body in whiten(BIW0welding welding fixture for an automobile component and investigation of critical component	1st International conference on Materials science and Engineering	International	55-61	2018-19
41.	P. M. Jadhav	Effective use of videos in classroom teaching for internet technology laboratory course	National conference on exploring new dimension in teaching learning for quality education	National	93-99	2018-19
42.	G. L. Suryawanshi, P. M. Jadhav , P. S.Jadhav	A Systematic Approach Of Quantitative Aptitude Preparation by using Collaborative learning Techniques-RIT Experience	The sixth international conference on transformations in engineering education 2019	International	1-6	2018-19
43.	P.C.Chavan A.K.Patil	Taguchi based optimization of machining parameter in drilling spheroidal graphite using combined TOPSIS and AHP Method	International conference on advanced engineering optimization through intelligent techniques	International	1-5	2018-19
44.	S. N. Sawant, P. V. Gunjavate	Problem based learning to get the RID of orthographic projection in engineering graphics course	The sixth international conference on transformations in engineering education 2019	International	266-269	2018-19
45.	S. B. Kumbhar	Piezoelectric energy generation as result of structural damping	1st International conference on Materials science and Engineering	International	536-552	2018-19
46.	S. B. Kumbhar	Static structural analysis of different nozzle with header	1st International conference on Materials science and Engineering	International	562-574	2018-19
47.	S. B. Kumbhar	Reduction of drum brake noise	1st International conference on Materials science and Engineering	International	754-763	2018-19
48.	S. B. Kumbhar	Study nature and behavior of vibration signals recorded by accelerometer and wear rate on PIN-ON-DISC tribometer using MATLAB tool	1st International conference on Materials science and Engineering	International	764-776	2018-19
49.	U. M. Nimbalkar	Reducing gyroscopic effect while using flywheel by means of alternate arrangements of small scale multiple flywheel	1st International conference on Materials science and Engineering	International	777-787	2018-19
50.	U. M. Nimbalkar	Design and development of fiber reinforced polymer by varying thickens of sections	1st International conference on Materials science and Engineering	International	829-44	2018-19
51.	L. R. Patil, S. S. Shirguppikar	Effective teaching of finite element method for undergraduate and post graduate students	National Conference on Exploring New Dimensions in Teaching for Quality Education	National	199-201	2018-19
52.	L. R. Patil, S. S. Shirguppikar	Project Based Learning approach to teach industrial engineering.	National Conference on Exploring New Dimensions in Teaching for Quality Education	National	267-269	2018-19
53.	S. S. Shirguppikar, S.R.Patil, S.A.Lavate	Experimental Investigation of Micro Electric Discharge Machining of Titanium Grade 5	International Conference Recent Advances in Materials, Manufacturing and Energy Systems	International	24	2019-20
54.	S. S. Shirguppikar, Dr.S.D.Patil	Effect of Different Electrode Materials on the Performance of EDM: A Review	International Conference Recent Advances in Materials, Manufacturing and Energy Systems	International	23	2019-20
55.	P.V.Gunjavate	Effect of Alkali treated Banana fibers on tensile properties of bio-composite material.	International research journal of engineering and technology (IRJET)	International	986	2018-19
56.	M.M.Mirza	Finite Element Analysis for large size Butterfly valve.	1st International conference on Materials science and Engineering	International	512-522	2018-19
57.	M.M.Mirza	A Comparative study of different crown material.	1st International conference on Materials science and Engineering	International	553-561	2018-19
58.	M.M.Mirza	Numerical Analysis for stiffness of Anti-roll Bar.	1st International conference on Materials science and Engineering	International	507-514	2018-19
59.	M.M.Mirza	Vibration Analysis of flexible narrow tubes using Acoustic excitation.	WESPAC2018	National	1	2018-19
60.	S. N. Jalwadi	CAD Automation of Heat Exchanger using NX CAD Software.	International Conference on Materials Science and Engineering (ICMSE).	International	725-736	2018-19
61.	S. N. Jalwadi	Design optimization and Simulation of pattern layout and gating system of Differential Housing	International Conference on Materials Science and Engineering (ICMSE).	International	--	2018-19
62.	S. N. Jalwadi	Optimization of Z-pin pattern to enhance bridging force by using Virtual Internal Bond Technique	International Conference on Materials Science and Engineering (ICMSE).	International	--	2018-19

Year 2017-18

Publication in H-Index Journal Paper 

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No./DOI no..
1.	S.B.Kumbhar, Dr.S.S.Gavade	Dynamic Performance analysis ofmagneto heologicalelastomer-shape memory alloy composite.	Journal of vibration Engineering and technologies.	5	6		2017-18	9	-	-	ISSN: 14775360
2.	S.B.Kumbhar, Dr.S.S.Gavade	Adaptive Tuned Vibration absorber based on manetorheological elastomer-shapes memory alloy composite	Mechanical system and signal processing	-	-	-	2017-18	121	4.116	-	DOI: 10.1016/2017.7.27 0888-3270
3.	S.B.Kumbhar,  Dr.S.S.Gawade	Two way stiffness turning of Magneto rheological elastomer shape memory alloy composite	Materials today proceeding.	5	5	13211-13223	2018-18	11	-	-	Doi.org/0.1016/j.matpr.2018.02.311
4.	M.V.Kavade	Goal setting and faculty development in an Indian engineering college.	American Society for Engineering Education	0	0	1-16	2017-18	5	-	-	-
5.	M. B. Mandale	Effect of changes in fiber orientation on model density of fiber glass composite plate.	Materials today proceeding	0	0	5783-5791	2017-8	11	-	-	ISSN:2214-7853
6.	Dr A. P. Shah,  Dr S. D. Patil	Performance, Emission and Combustion Analysis of Biodiesel Extracted from Acidic oil: A By-product of Soybean Oil Refining Process	Modeling, Measurement and Control	78	0	337-350	2017-18	5	-	-	-
7.	S.R.Patil  Dr.S.S.Gawade	Preparation characterization and performance analysis of BTO based high yield straight electo rheological fluid in artillery gun recoil system using FEA approach.	Materials today proceeding	5	2	8222-8231	2017-18	11	-	-	ISSN:2214-7853
8.	P S Jadhav	Facile synthesis and photo electrochemical performance of SnSe thin films	American Institute of Physics	1953	1		2017-18	24	-	-	DOI-10.1063/1.5032710
9.	P S Jadhav ,  S S Shirgupikar	Experimental investigation of CNT coated tools for EDM Processes.	Materials today proceeding	7	2	7795-7603	2017-18	11	-	-	ISSN:2214-7853
10.	S S Shirgupikar	Experimental investigation of dry eclectic discharge machine(Dry EDM ) Process on Bright Mild steel	Materials today proceeding	5	2	7131-7140	2017-18	11	-	-	ISSN:2214-7853
11.	R.V.Pawar	A Comprehensive review on influence of biodiesel and additive performance and emission of diesel engine	Chemical engineering transactions	65	0	451-456	2017-18	25	-	-	ISSN:2283-9216
12.	Dr.S.M.Sawant	Effect of Oxy-Hydrogen Addition in Gasoline on Engine Performance, Combustion Characteristics and Combustion Process at Different CR and IA.	Int. J.of applied engineering research	13	11	10038-10047	2017-18	35	-	-	ISSN:0973-4562
13.	Dr.S.M.Sawant	Response Surface Methodology (RSM)Based Optimization of engine operating parameters fuelled with blends of diesel and oxy-hydrogen gas.	Int. J.of mechanical and mechatronics engineering	18	2	22-31	2017-18	9	-	-	-
14.	Dr.S.M.Sawant	Experimental stuies on magnetoreholgical brake for automotive application	Int. J.of automotive and mechanical engineering	15	1	4893-4908	2017-18	19	-	-	ISSN:2229-8649
15.	Dr.S.M.Sawant	Simulation -based estimation of an automotive magnetorheological brake system performance	Journal of advanced research	14		43-51	2017-18	28	-	-	Doi.org/10.1016/j.jare..2018.05.011
16.	Dr.S.M.Sawant	A Review of laminar flame speed measurement technique with advantages and challenges involve in a use of hydrogen-methane blend in existing internal combustion engines	Journal of computational information system	14	1	18-22	2017--18	21	-	-	ISSN:1553-9105
17.	Dr.S.M.Sawant	A Comparative study on automotive brake testing standards.	Journal Inst .Eng. India ser.	98	4	527-531	2017-18	7	-	-	DOI.10.1007/s40032-016-0289-y

Publication in Journal Paper

Sr.No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Dr.S.S.Gawade	Weight Optimization And Buckling Analysis Of Tie Rod Using CFRC Material	International Journal of Advance Research in Science and Engineering	7	-	726-732	2017-18	-	-	-	ISSN:2319-8354
2.	M.V.Kavade	Study and review of heat recovery system for SO2 gas generation process in sugar industry.	International research journal of engineering and technology	4	11	485	2017-18	-	-	6.171	ISSN:2395-0072
3.	B.R.Jadhav	Optimization of casting process parameters through simulation	International journal of advance research in science Engineering.	7	3	686-692	2017-18	-	-	-	ISSN:2319-8354
4.	S.V Kadam	Numerical analysis of proper blade temperature for optimized stub of pusher configured turboprop aircraft.	International journal of innovative research in science  engineering and technology	7	4	3444-3452	2017-18	-	-	-	` ISSN(Online): 2319 - 8753 ISSN (Print): 2347 - 6710
5.	Dr A. P. Shah	CFD Analysis of Heat Transfer Enhancement in Pipe Flow using Nanofluid	International Advanced Research Journal in Science, Engineering and Technology	4	1	7-12	2017-18	-	-	-	DOI – 10.17148/IARJSET.2017.4102
6.	Dr A. P. Shah	Modeling and Analysis of High Thermal Conductivity Heat Pipe Thermal Ground Planes	International Journal of Scientific Development and Research	1	10	87-93	2017-18	-	-	-	ISSN: 2455-2631
7.	C.A.Waghmare	Quantification of bullwhip effects its supply chain management.	International journal of advance research in science Engineering.	7	0	5557-5565	2017-18	-	-	-	ISSN:2454-7875
8.	U.M. Nimbalkar	Contact analysis of real wheel using finite element technique-A Review	International journal of advance research in science Engineering.	7	1	921-932	2017-18	-	-	-	ISSN:2319-8354
9.	U.M. Nimbalkar	Casting simulation to identify shrinkage zone in flywheel casting by using pro-cast	International journal of advance research in science Engineering.	7	1	956-962	2017-18	-	-	-	ISSN:2319-8354
10.	S.R.Patil	Ceramic Reinforced metal matrix composite processing	International journal of advance research in science Engineering.	7	3	861-869	2017-18	-	-	-	ISSN:2319-8354
11.	S.R.Patil	Numerical analysis of ultra high temperature ceramic for aerospace application.	International journal of advance research in science Engineering.	7	3	799-804	2017-18	-	-	-	ISSN:2319-8354
12.	S.R.Patil	Synthesize and fabrication of artificial human bone developed by using nano composite	International journal of advance research in science Engineering.	-	-		2017-18	-	-	-	-
13.	P S Jadhav	Analysis of variance for MRR on ECDM.	International journal On theoretical and applied research in mechanical engineering.	1	7	119-123	2017-18	-	-	-	ISSN:2319-3182
14.	P S Jadhav	'Experimental setup design forElectrochemical Discharge Machining	Global Journal of Engineering Science and Research Management	-	-	-	-	-	-	-	ISSN 2349-4506
15.	P M. Jadhav	An integrated approach for teaching object oriented programming (C++) course.	Journal of Engineering Education and transformation.	31	3	-	2017-18	-	-	-	ISSN:2349-2473
16.	R.V.Pawar	Development of (aluminum and E-glass fiber) hybrid composite double lap riveted joint for tension and validate by FEM software	International Research Journal   of Engineering and technology	5	3	1375-1381	2017-18	-	-	6.171	ISSN:2395-0056 P2395-0072
17.	M. M. Mirza	Design and Analysis of Axle for Improved Stability of Bullock Cart	International journal of advance research in science Engineering.	7	3	1222-1227	2017-18	-	-	-	ISSN:2319-8354
18.	Dr.R.G. Desavale	Development of Asbestos free Friction Material	International journal of advance research in science Engineering	7	3	853-860	2017-18	-	-	-	ISSN:2319-8354

Publication in Conference Paper

Sr. No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Dr.S.K.Patil,  P.A.Patil	Advances in Abrasive Flow Machining Technology for Fine Finishing: A Review	4th International Conference on Industrial Engineering.	International	496	2017-18
2.	Dr. S. K. Patil	Experimental investigation on heat assisted drilling machine	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18).	National	572	2017-18
3.	Dr. S. M. Sawant	Numerical analysis of application of vortex generator in perforated plate-fin heat sink	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18).	National	395	2017-18
4.	Dr. S. M. Sawant	Numerical analysis of circular fins in triplex heat exchanger with pcm	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18).	National	399-402	2017-18
5.	Dr. S. M. Sawant	Parametric Analysis of Centrifugal Pump Impeller	International Journal of Advance Research in Science and Engineering.	National	680-685	2017-18
6.	Dr. S. M. Sawant	Numerical analysis of Perforated Plate Pin Fin type of Heat Sink	International Journal of Advance Research in Science and Engineering.	National	664-672	2017-18
7.	Dr. S. M. Sawant	Numerical analysis of fin-and-tube heat exchanger for punch delta winglet vortex generator with hole	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) .	National	403-408	2017-18
8.	Dr. S. S. Gawade	experimental analysis of femur bone by strain gauge method	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18).	National	497	2017-18
9.	Dr. S. S. Gawade	Stress analysis of worm wheel used in crate washer gear box	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	510	2017-18
10.	Dr. S. S. Gawade	Design, modeling, and fabrication of non - circular gears	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	520	2017-18
11.	Dr. S. S. Gawade	Analysis Of Gerotor In A Lubricating Oil Pump	International Conference on New Era in Technologies, Science and Role of Management	International	473-483	2017-18
12.	B.R.Jadhav	Experimental investigation of hot machining of en- 19 steel	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	562	2017-18
13.	B.R.Jadhav	Experimental investigation of parameters influencing on fsw of aa6061 and aa6063	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	566	2017-18
14.	M.V.Kavade, P.S.Jadhav, S.B.Khot	Pedagogical Reform for delivering an open elective course at undergraduate level and analysis of its impact on student performance	International Conference on Transformation in Engineering Education (ICTIEE-18)	International	-	2017-18
15.	M.V.Kavade	Experimental investigation of drilled epoxy resin glass fiber by using filler materials	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	576	2017-18
16.	M.V.Kavade	Behavior of inline knockout machine operating under vibration	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	438-443	2017-18
17.	M.V.Kavade	Feasibility study of electromagnetic aircraft launching system (emals) by using advance analysis tools	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	444-447	2017-18
18.	M.V.Kavade	Stress analysis of functionally graded shell	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	448-457	2017-18
19.	M.V.Kavade	Development of automatic control system & performance analysis of heat recovery system in so2 gas generation process	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	485-489	2017-18
20.	M. B. Mandale	Stress concentration analysis of composite plate with different cut-out for varying load condition	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	501	2017-18
21.	M. B. Mandale	Numerical analysis of water turbine for small scale power generation (horizontal axis perpendicular to flow water turbine)	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	505	2017-18
22.	M. B. Mandale	Numerical study of stresses in dental materials by using finite element analysis	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	514	2017-18
23.	M. B. Mandale	Implementation of two-cavity method for measuring the flow resistivity of acoustic material	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	547-551	2017-18
24.	M. B. Mandale	Design of mechanism for retrieval of tray in STO lift machine.	International Conference new era technology in science Engineering and role of management.	International	-	2017-18
25.	Dr.S.D.Patil	Numerical Investigation  of mini-channel metal hydride reactor for hydrogen storage	2nd International Conference of heat and mass transfer (IHMTC-2017)	International	-	2017-18
26.	Dr.S.D.Patil	Numerical Investigation  of influence of variation in offset ribs on fluid flow and heat transfer in micro channel heat sink	2nd International Conference of heat and mass transfer (IHMTC-2017)	International	-	2017-18
27.	Dr.S.D.Patil	Mathematical modeling of evaporation of water droplet, its implementation and validation	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	409-413	2017-18
28.	Dr.S.D.Patil	Numerical analysis of steam flow in steam turbine nozzle blade cascade	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	414-417	2017-18
29.	Dr.S.D.Patil	Numerical analysis of splitted cylindrical metal hydride hydrogen storage reactor	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	418-423	2017-18
30.	Dr.S.D.Patil	Techno-economic analysis of solar pv system	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	424-428	2017-18
31.	Dr.S.D.Patil	Simulation of thermo mechanical stress in gas turbine blade of an aero engine under service condition.	NCRTME-17	National	-	2017-18
32.	Dr.S.D.Patil	Numerical investigation of design mono hull under extreme irregular sea condition using boundary element.	International Conference on immerging technology in mechanical engineering.	International		2017-18
33.	Dr. S.D. Patil	Numerical Analysis of Heat Transfer Enhancement in Artificially Roughened Solar Air Heater.	6th International Conference on Advances in Energy Research At IIT Bombay.	International	1-6	2017-18
34.	R.G.Desavale	Investigation of vibration characteristics of rotor-bearing system due to unbalanced and clearance using dimensional analysis	International Conference on vibration problem.	International	-	2017-18
35.	R.G.Desavale	Influences of instantaneous defective frequency on speed and life of ball bearing	International Conference on vibration problem.	International	-	2017-18
36.	R.G.Desavale	Dynamic modeling of a rotor bearing structure and vibration based surface defect analysis	International Conference on vibration problem.	International	-	2017-18
37.	R.G.Desavale	Numerical analysis of acoustic attenuation and performance characteristics of diesel engine muffler.	International Conference on vibration problem.	International	-	2017-18
38.	Dr. R. G. Desavale	Development of al5083 composite matrix used in ship structure	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	531-536	2017-18
39.	S.N.Jalwadi	Investigation of bending behavior of (carbon/epoxy) composite material using fea	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	467-470	2017-18
40.	S.N.Jalwadi	Implementation of modified virtual internal bond method to investigate fracture simulations in brittle materials.	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	475-480	2017-18
41.	S.N.Jalwadi	Systematic efficiency improvement by optimizing the assembly line using witness simulation software	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	490-496	2017-18
42.	S.N.Jalwadi	Facture simulation Quasi brittle material using virtual internal bond model	India Conference  on applied mechanics (INCAM)	National	-	2017-18
43.	Dr. A. P. Shah	Enhancement of Heating Surface Area In Steam Boiler: A Review	1st National Conference on 'Recent Innovations in Mechanical Engineering'  NCRIME-2018	National	44-47	2017-18
44.	Dr. A. P. Shah	Effect of Fuel Injection System on Smoke Emission for two Cylinder Genset Engine’	4th National Conference for Post Graduate Students (RIT NCon PG-18)	National	-	2017-18
45.	Dr A. P. Shah	Effect of piston bowl geometry on smoke emission for two cylinder genset engine	2nd International Conference on new frontiers Engineering science, management and humanities	International	60-66	2017-18
46.	Dr.A. P. Shah	Numerical analysis of drag on blunt bodies with the use of different conical spikes at supersonic speed	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	389-394	2017-18
47.	Dr. A. P. Shah	Numerical analysis on thermal energy storage tank filled with phase change material	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	395-398	2017-18
48.	S.V Kadam	Numerical simulation of heat transfer enhancement of mgo/water nanofluids in automotive radiator	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	429-432	2017-18
49.	S.V Kadam	Numerical analysis of air flow in room with different position of inlet and outlet vent.	11th International Conference on recent innovation in science Engineering and management.	International	-	2017-8
50.	S.B. Kumbhar	Fabrication & evaluation of mechanical properties of banana glass epoxy reinforced composite	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	536-541	2017-18
51.	S.B. Kumbhar	Design, Fabrication And Experimentation For Glass Fiber Reinforced Composite Torsion Bar.	Recent Trends in Mechanical Engineering.	National	1-5	2017-18
52.	C.A.Waghmare	Improvement of quality and yield of miniature circuit breakers by six sigma	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	557	2017-18
53.	C.A.Waghmare	Design and fabrication of semiautomatic gravity die-casting machine	International Conference on recent innovation in science Engineering and management.	International	-	2017-18
54.	M.L.Deshpande,  P.A.Patil	Supply Chain Performance measurement: A literature review	4th International Conference on Industrial Engineering	International	277	2017-18
55.	M. M. Mirza	Analytical and numerical analysis of vibration isolator for hermetically sealed compressor	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	542-546	2017-18
56.	M. M. Mirza	Vibration measurement of flexible narrow tube under acoustic excitation	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	552-556	2017-18
57.	S. R. Patil	Optimization in the aspect of crash triggers pattern under axial and oblique impact loading	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	526-531	2017-18
58.	A.M.Mulla	Optimization of process parameters in EDM	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	569	2017-18
59.	A.M.Mulla	Analysis of response variables in wedm of nimonic c-263 using taguchi technique	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	579	2017-18
60.	U. M. Nimbalkar	Finite element analysis of crankcase	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	458-461	2017-18
61.	U. M. Nimbalkar	Design and modeling of rail transfer trolley	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	462-468	2017-18
62.	U. M. Nimbalkar	Identification of shrinkage due to modulus of flywheel casting by using procast software	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	471-474	2017-18
63.	S.B. Khot	Redesign and analysis of gating system of b515 ford drum	Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18)	National	481-484	2017-18
64.	P S Jadhav,   S.B.Khot	A novel approach toward first year engineering workshop practice course with combination of project and product based learning for improved and joyful learning.	Global Journal of Engineering Science and Research Management	International	85-92	2017-18
65.	S S Shirgupikar	Multi Objective Optimization of Process Parameters of Dry EDM using Grey Relational Analysis	4th International Conference on Industrial Engineering	International	-	2017-18

Year 2016-17

Publication in H-Index journal

Sr. No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ ISBN No.
1.	Dr S K Patil	A Fuzzy ANP based approach for selection of knowledge management  strategy to build resilient supply chain: an empirical case study	International Journal of Integrated Supply Management	10	2	-	2016-17	17	-	-	-
2.	S V Kadam	Numerical and Experimental Analysis of MgO Nanoparticles Suspension in Water on Convective Heat Transfer	Materials today proceeding	5	2-	-	2016-17	11	--	-	-
3.	S. S.Shirgupikar	Synthesis-characterization-of-silver-doped-hydroxyapatite-nanoparticles-for-biomedical-applications	Der Pharma chemica	9	3	78-84	2016-17	22	--	-	-
4.	S. S.Shirgupikar	Enhanced Hemolytic Biocompatibility of Hydroxyapatite by Chromium (Cr3+) Doping in Hydroxyapatite Nanoparticles Synthesized by Solution Combustion Method	Journal of Korean ceramic society	54	2	158-166	20116-17	12	--	-	-
5.	S. S.Shirgupikar	Development of Thin Film Coating of CNT for Tools Used in EDM Processes	Materials today proceeding	5	2	53	2016-17	11		-	-
6.	Dr. R. G. Desavale	Damage Detection of roller Bearing System using Experimental Data	Procedia Engineering	144	-	202-207	2016-2017	40	-	-	ISSN 1877-7058
7.	Dr. R. G. Desavale	Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis	Procedia Engineering	144	-	195-201	2016-2017	40	-	02	ISSN 1877-7058

Publication in international Journal

Sr. No.	Authors name	Paper title	Journal name	Volume no.	Issue no. if any	Page nos.	Year and month of publication	H-index	SCI Impact factor	Non SCI Impact factor if any	ISSN/ISBN No.
1.	Dr. S.K Patil	Evaluating the impact of Knowledge Management adoption on Supply Chain performance by BSC-FANP approach: An empirical case study.	(Applied Management Studies)	14		52-74	20116-17	-	-	-	ISSN: 1645-9911
2.	Dr. S.K Patil	Analysis of Learning Styles of Engineering Students for Improving Engineering Education	Journal of Engineering Education & Transformation (JEET-17)	30	-	-	2016-17	-	-	-
3.	Dr M T Telsang	Impact of IUCEE IGIP Engineering Educator's Certification Program on Teaching Performance of Participants	Journal of Engineering Education & Transformation	30	-	-	2016-17	-	-	-	ISSN:2349-2473
4.	Dr S M Sawant	Investigation of Emission in Inline Diesel   Engine Combustion Using ECFM-3Z Model	International Engineering Research Journal(IERJ)	-	-	90-93	20116-17	-	-	-	ISSN:2395-1621
5.	.Dr S M Sawant	Thermal Performance Analysis of High Altitude Engine Radiator	International Engineering Research Journal(IERJ)	-	-	63-68	20116-17	-	-	-	ISSN:2395-1621
6.	S.S. Gawade	Internal Combustion Engine Vibrations And Vibration Isolation.	International Journal of Scientific & Engineering Research.	08	04	243-250	2016-17	-	-	-	ISSN:2229-5518
7.	M.B.Mandale	Torsional Dynamic Stiffness of Flexible Coupling by Analytical and Simulation Method.	International l of Engineering Research Journal	-	-	121-123	2016-17	-	-	-	ISSN: 2395-1621	-
8.	.M.V.Kavade	Design of gears for drilling machine.	International journal of scientific and engineering research	8	4	727-735	20116-17	-	-	-	ISSN: 2349-2473
9.	M.V.Kavade	Delamination detection in Composite Sandwich Beam: Experimental study	Journal of Advances in Science and Technology	-	--	-	2016-17	-	-	-	-
10.	.M.V.Kavade	Design of crankshaft of micro alloy steel by using MATLAB for fatigue failure	Journal of Advances in science and technology	-	-	-	2016-17	-	-	-	ISSN: 2229-5518
11.	M.V.Kavade, S. B. Khot	Impact of IUCEE IGIP Engineering Educator's Certification program on Teaching performance of participants.	Journal of Engineering Education Transformations (JEET)	30		.	2016-17	-	-	-	ISSN: 2278-0181
12.	N.K. Chapkhane	Determination of Impact Force for Turbine Housing Containment.�	International Journal of Engineering Research & Technology (IJERT)	5	5	612-618	20116-17	-	-	-	ISSN:2348 -3121
13.	.N.K. Chapkhane	Design and analysis of subsoiler.	international journal of modern tread in engineering science	4	01	11-17	20116-17	-	-	-	ISSN: 2349-2473
14.	.N.K. Chapkhane	Development of Wheel Profile from Flute Profile	International Journal of machines. Material& manufacturing Engineering.	-	-		2016-17	-	-	-	-
15.	N.K. Chapkhane M.M Mirza	Progressive Failure Analysis of Composite Plate using FEA	International l of Engineering Research Journal	-	-	1-7	2016-17	-	-	-	ISSN: 2395-1621
16.	S.N. Jalwadi	Development and Implementation of guideline for Die casting process in DFM Pro software	International Journal of scientific and engineering research	8	4	359-365	20116-17	-	-	-	ISSN 2229-5518
17.	S.N.Jalwadi	Optimization and Development of aluminum gear box for welding head of SAW machine.	International l of Engineering Research Journal	-	-	136-138	2016-17	-	-	-	ISSN: 2395-1621
18.	S V Kadam	Development of Numerical Model for Cooling System of 10 MeV LINAC using ANSYS Fluent	IJSED International Journal for Scientific Research & Development	5	4	1-3	2016-17
19.	M.M Mirza	Effect of changing of spur gear tooth parameter on bending stress by simulation	international research journal of engineering & technology	4	4	23-27	20116-17			5.181	ISSN: 2395-0056
20.	A.M Mulla	CFD analysis of maglev train for high speed corridor project	International Journal of Scientific Engineering Research.	8	4	212	20116-17	-	-	-	ISSN: 2230-9659
21.	U.M Nimbalakar	Review on Manufacturing Predictive Simulation: Use of WITNESS Simulation Software	International Journal of Scientific and Engineering Research.	8	4	355	20116-17	-	-	-	e-ISSN(O):2348-4470 p-ISSN (P): 2348-6406
22.	P M Jadhav	A holistic approach for teaching data structure course in the department of IT	Journal of Engineering Education & Transformation	--	-	-	2016-17	-	-	-	ISSN: 2349-2473
23.	P M Jadhav , P S Jadhav, A.M Mulla	Blending ICT with project based learning for effective teaching and learning of Mechatronics.	Journal of Engineering Education & Transformation	30	-	-	2016-17	-	-	-	ISSN: 2349-2473
24.	P S Jadhav	Analysis of Heat Transfer coefficient in Heat Pipe	Journal of Advances in Science & Technology	13	1	46	2016-17	-	-	-	ISSN: 23933031
25.	P S Jadhav	Reduction of west by applying lean manufacturing toll for assembly line layout	Journal of Advances in Science & Technology	4	1	1-7	2016-17	-	-	-	ISSN: 2393-3021
26.	L R  Patil	Rotor dynamic Analysis of Bolted Disk-Drum Rotor with Contact Nonlinearity	International journal of scientific and technical research in engineering	1	3	1	20116-17	-	-	-
27.	R.V Zende	A comparative study of cutting forces with Ti–6Al–4V and Inconel 718 using coated carbide tool with dry and wet high speed machining	International Journal of Advance Engineering andResearch Development	-		-	20116-17	-	-	-	e-ISSN:2395-0056,p-ISSN:2395-0072
28.	A.B Chougule	Adaptive Front Luminous System Of Roadster on a way using Arduino.	International Journal of Research in engineering and technology.	5	7	314	20116-17	-	-	-	E-ISSNs: 2319-1163.

Publication in Conference Paper

Sr. No.	Authors name	Paper title	Conference Name	International/National	Page nos. If any	Year and month of publication
1.	Dr. S. K. Patil	Ranking the Enablers of Knowledge Management adoption in Supply Chain by using Trapezoidal fuzzy AHP Method)	International Conference on Best Practices in Supply Chain Management to be held at College of engineering, Trivandrum from 22nd December to 23rd December 2016.	International	-	2016-17
2.	Dr. S. K. Patil	Progress and Development of Silicon Based Ceramic Matrix Composite Brake Material for Military Aircraft's - A Preliminary Study	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	4-9	2016-17
3.	Dr. S. K. Patil	Teaching-Learning based optimization algorithm.	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	9-15	2016-17
4.	S. K. Patil	Intelligent Manufacturing System (IMS) for Design Unconstrained layout.	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	15	2016-17
5.	.Dr. S. K. Patil	Bobbin tool friction stir welding and knowledge based design review	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale.	International	16	2016-17
6.	Dr. S. K. Patil	ADACOR architecture in Holonic Manufacturing System at shop floor level	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	16	2016-17
7.	Dr. S. K. Patil	Implementation of Lean Manufacturing Technique for Milk Processing Industries	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	17	2016-17
8.	Dr. S. K. Patil	Applications of genetic algorithm	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	18	2016-17
9.	Dr. S. K. Patil	Pipe Material Selection in Sugar Industry by Using fuzzy TOPSIS Method	International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale	International	33	2016-17
10.	Dr. S. K. Patil	Application of Value Stream Mapping(VSM):A Case Study of Gear Manufacturing Industry	3rd RIT-National Conference for Engineering Post Graduates	National	-	2016-17
11.	Dr. S. K. Patil	Analysis of cycle time of assembly line using MTM method: A Case Study of Manufacturing Industry	3rd RIT-National Conference for Engineering Post Graduates	National	-	2016-17
12.	Dr.  M.T. Telsang	Redesign, develop and optimization of mixed-model assembly line using witness software	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	8	2016-17
13.	Dr.  M.T. Telsang	Design and Development of low cost automation system using component, instrument and techniques.	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	31	2016-17
14.	Dr.  M.T. Telsang	Development of Model Customization by using CAD Kernel Open Cascade: A Review	Proceedings of the Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	29	2016-17
15.	Dr. S M Sawant	Numerical Investigation of Effect of Shield on Thermohydraulic Performance of Plate-pin Fin Heat Sink.	3rd RIT Post Graduates Conference (RIT PG Con	National	1-6	2016-17
16.	Dr. S M Sawant	Numerical And Experimental Investigation of Thermal Behaviour of Cross Flow Heat Exchanger.	3rd RIT Post Graduates Conference (RIT PG Con	National	-	2016-17
17.	Dr. S M Sawant	Design And Performance Analysis of Air To Air Heat Exchanger For Electrical Control Panel (The cooling system for enclosure of electronic components)	3rd RIT Post Graduates Conference (RIT PG Con	National	1	2016-17
18.	Dr. S.S .Gawade	Development and Simulation of an Integrated (Microwave + Dehumidification) Drying System for Fruit and Vegetables	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	444	2016-17
19.	Dr. S.S .Gawade	A Review : Analysis and Characterization of Inflatable Material Structure	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	458	2016-17
20.	Dr. S.S .Gawade	Use of smart fluid in anti-vibration mounts	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	480	2016-17
21.	Dr. S.S .Gawade	High Yield Strength ER Fluid for Heavy Duty Applications-Methodologies	Modern Era Research in Mechanical Engineering	International	101	2016-17
22.	Dr. S.S .Gawade	Alternative Fuels for IC Engines: A Review	Modern Era Research in Mechanical Engineering	International	133	2016-17
23.	Dr. S.S .Gawade	Design analysis and optimization of 10�-600# gate valve body	Modern Era Research in Mechanical Engineering	International	207	2016-17
24.	Dr. S.S .Gawade	Investigation on Effect of Defect on Deep Groove Ball Bearing by Experimental and FEA Approach	Modern Era Research in Mechanical Engineering	International	321	2016-17
25.	Dr. S.S .Gawade	Viable Applications of Electro-Rheological Fluids- A Strategic Review	Modern Era Research in Mechanical Engineering	International	344	2016-17
26.	Dr. S.S .Gawade	A Review of Dry Particulate Lubrication of Journal bearing	Modern Era Research in Mechanical Engineering	International	575	2016-17
27.	Dr. S.S .Gawade	Design & Prototyping of Magneto rheological Disc Brake for Automotive Application	Modern Era Research in Mechanical Engineering	International	585	2016-17
28.	Dr. S.S .Gawade	Journal Bearing Test Rig for Pressure Distribution	Modern Era Research in Mechanical Engineering	International	592	2016-17
29.	Dr. S.S .Gawade	Preparation Characterization and performance analysis of BTO Based high yield strength electro rheological fluid in artillery gun recoil system using FEA approach.	IMME17, NIT Trichy	International	111	2016-17
30.	Dr. S.S .Gawade	Design and Development of Intake device for bio gas operated 4 stroke SI engine	International conference on current research topic in power, nuclear and fuel energy	International	-	2016-17
31.	Dr. S.S .Gawade	Two way stiffness tuning of MRE- shape memory alloy composite	International conference on material Manufacturing and modeling, (ICMMM) - 2017, VIT Velure.	International	-	2016-17
32.	Dr. S.S .Gawade	Performance Analysis of Different Metallic Diaphragm by using theoretical & FEM	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	265	2016-17
33.	Dr. S.S .Gawade	Design and Development of Electro-Rheological fluid Machine Toll Mount	International conference on current research topic in power, nuclear and fuel energy	International	723	2016-17
34.	Dr. S.S .Gawade	A Review: Exhaust Gas Recirculation Mixer Foe Diesel Engine.	NCRTM	National		2016-17
35.	Dr. S.S .Gawade	An Experimental Study of Tribological Behavior of Journal and Bearing Material Under Graphite Lubrication	NCRTM	National		2016-17
36.	M.V. Kavade	Delamination detection in Sandwich structure using frequency response function - Review	Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16)	International	-	2016-17
37.	M.V. Kavade	Industrial Internet technology	Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16)	International	-	2016-17
38.	M.V. Kavade	Hybrid layered manufacturing: Rapid tooling process	Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16)	International	-	2016-17
39.	M.V. Kavade	Design of crankshaft of micro-alloy steel by using MATLAB for fatigue strength	Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17)	International	410	2016-17
40.	M.V. Kavade	Customization for 3D CAD of radiator tanks and header plate using Creo software	Proceedings of the third RIT Post Conference (RIT PG Con-17)	International	404	2016-17
41.	M.V. Kavade	New production layout design for increasing production rate using SLP method: A case study of fabrication industry	Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17)	International	577	2016-17
42.	M.V. Kavade	Numerical simulation of nuclear shock wave propagating through conduit with side branch	Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17)	International	391	2016-17
43.	B.R Jadhav	A Case study to improve consultancy in mechanical engineering department.	(IUCEE) Fourth ICTIEE 2017 At Hyderabad, Fourth international conference on transformation in engineering education	International	82	2016-17
44.	B.R Jadhav	Genetic algorithm approach for optimization of CNC turning	MERME-16 Paper ID-122,International conference on modern era research in mechanical engineering-2016	International	56	2016-17
45.	B.R Jadhav	Ultrasonic vibration assisted friction stir welding	MERME-16 Paper ID-129,International conference on modern era research in mechanical engineering-2016	International	56	2016-17
46.	B.R Jadhav	Effect of submerged arc welding process parameters on IS-2062Grade-B Steel Paper ID-PE1	RIT PGCON 2017 Paper ID-PE 1,Proceedings of the 3rd RIT Post graduates conference	International	547	2016-17
47.	B.R Jadhav	Waste heat recovery system in metal casting	MERME-16 Paper ID-126,International conference on modern era research in mechanical engineering-2016	International	49	2016-17
48.	B.R Jadhav	Effect of post heat treatment on aluminum alloy	MERME-16 Paper ID-21,International conference on modern era research in mechanical engineering-2016	International	-	2016-17
49.	N .K. Chhapkhane	Correlating Kano’s model with phases in Product Re-Design and Development.	Proceedings of the 2nd National Conference for Engineering Post Graduate Students, RIT NConPG-16	National	-	2016-17
50.	N .K. Chhapkhane	API BB2 Pump casing design and verification using fem	NCMMME-2016.	National	-	2016-17
51.	N .K. Chhapkhane	Design & Development of Automatic Sorting Machine Cooked & Dried Turmeric Rhizomes		International	01	2016-17
52.	.N .K. Chhapkhane	Stress Analysis of High Pressure Casting Cylinder for Reciprocating Compressor.	Proceeding of the 3rd National Conference for Engineering Post Graduate students RIT NCon. PG-17	National		2016-17
53.	S.N. Jalwadi	Stress concentration studies for crack propagation analysis of spur gear using ABAQUS	3rd RIT Post Graduate Conference (RIT con-17)	National	379	2016-17
54.	S.N. Jalwadi	Investigating fracture behavior in brittle material by using virtual internal bond model	3rd RIT Post Graduate Conference (RIT con-17)	National	394	2016-17
55.	S.N. Jalwadi	Fracture parameters evaluation in nanomaterials using VIB model	3rd RIT Post Graduate Conference (RIT con-17)	National	417	2016-17
56.	S.N. Jalwadi	Optimization and development of aluminum gear box for welding head of SAW machine	International conference on Innovations and Recent trends in engineering (ICIRTE-2017))	International	-	2016-17
57.	S. D Patil	Design and analysis of compact metal hydride reactor for hydrogen storage	International conference on Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	54	2016-17
58.	S. D Patil	Numerical Analysis of Multi-Corrugated Tube Metal Hydride Based Hydrogen Storage System	International conference on Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	313	2016-17
59.	S. D Patil	Aerodynamic study of Flow over a Sphere	RIT Post Graduate Conference for engineering students 2017	National	509	2016-17
60.	S. D Patil	Optimization of pipe for pressure drop using Design of Experiment	RIT Post Graduate Conference for engineering students 2017	National	513	2016-17
61.	S. D Patil	Design Space Analysis and Parameter based Optimization of Downpipe by Response Surface Method	RIT Post Graduate Conference for engineering students 2017	National	517	2016-17
62.	S. D Patil	Numerical Analysis of Mini-channel Metal Hydride Reactor for Hydrogen Storage	RIT Post Graduate Conference for engineering students 2017	National	533	2016-17
63.	S. D Patil	Numerical study of fluid flow and heat transfer in micro channel heat sink	RIT Post Graduate Conference for engineering students 2017	National	542	2016-17
64.	S. D Patil	A Case Study to Improve Consultancy in Mechanical Engineering Department	Fourth International conference on transformation in Engineering Education	International	82	2016-17
65.	Dr.  S. D Patil	Numerical Investigation of Design mono hull under extreme irregular sea conditions using Boundary Element Method and Strip theory.	International Conference on Emerging Technogiical Innovations in Mechanical Engineering.	International	1-6	2016-17
66.	R.G. Desavale	Experimental mathematical model for diagnosis of vibration generated in defective rolling element bearing	ISME2017	International	1-5	2016-17
67.	R.G. Desavale	Dynamic modeling of taper roller bearing with surface defect using matrix method.	ISME2017	International	1	2016-17
68.	M. B Mandale	Vibration Analysis of an Automobile Exhaust Muffler	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	438	2016-17
69.	Mandale M. B	Study of Structural Stability, Micro phonics and Sensitivity to Helium Pressure for Spoke Resonator	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	463	2016-17
70.	M. B Mandale	Design and analysis of CHAMP T 400 Welding machine.	3rd RIT Post Graduates Conference (RIT PG Con-17)	National	475	2016-17
71.	M. B Mandale	Thermal Management of Electronic Packaging -A Review	MERME-2016	International	559	2016-17
72.	M. B Mandale	Disc Brake Squeal-A Review	MERME-2016	International	12	2016-17
73.	M. B Mandale	Torsion dynamic stiffness of flexible coupling by analytical and simulation method	ICIRTE-2017 at AGCE, Satara	National	-	2016-17
74.	.  M. B Mandale	condition monitoring of centrifugal pump-brief study	MERME-16	International	602	2016-17
75.	M. V Pisal	Review of dehydration& Dryer generation	MERME-2016. RIT	International	-	2016-17
76.	M. V Pisal	Experimental Investigation of dehydration of Jaggery.	RIT PG CON	National	-	2016-17
77.	.  M. V Pisal	Multiaxis machining centers	MERME16	International	-	2016-17
78.	M. V Pisal	Belt finishing Processes	MERME-2016. RIT	International	-	2016-17
79.	S. V. Kadam	CFD analysis of led cooling setup with nanofluids	Proceedings of the Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	-	2016-17
80.	S. V. Kadam	Numerical heat transfer analysis of flowing fluid through a circular tube with helical twisted strip inserts	1st National Conference on Mechanical Engineering in Next Decade (NC-MEND2017), March 10-11, 2017 at Government College of Engineering., Karad, Maharashtra, INDIA.	National	-	2016-17
81.	S. V. Kadam	Numerical simulations of plate fin oil cooled heat exchanger	PG Ncon 2017	National	-	2016-17
82.	S. V. Kadam	Numerical Investigation of Convective Heat Transfer Enhancement by using CuO Nanoparticles.	PG Ncon 2017	National	-	2016-17
83.	S. V. Kadam	Numerical and Experimental Analysis of MgO Nanoparticles Suspension in Water on Convective Heat Transfer	ICAMMAS17	International	-	2016-17
84.	S. V. Kadam	Heat Transfer characteristic of helical coil by using CFD	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	-	2016-17
85.	Dr.A.P.Shah	Preparation and Characterization of Biodiesel Extracted from Acidic Oil: a By –product of Soybean oil Refining Process.	International Conference on Emerging Technogiical Innovations in Mechanical Engineering.	International	1-5	2016-17
86.	Dr.A.P.Shah	Computational Modelling for High Thermal Conductivity Heat Pipe Thermal Ground Planes	Int. Conference on Modern Era Research in Mechanical Engineering –MERME-2016	International	1-5	2016-17
87.	Dr.A.P.Shah	Mathematical modeling & design of worm and worm gear pair for determining the surface stress acting on the tooth of worm and worm gear for plug Valve application	5th National Conference on “Innovations in Mechanical Engineering	National	-	2016-17
88.	Dr.A.P.Shah	Learning Centric Approach through Various Class Room Activities for Better Learning	National Conference on Innovations in Engineering and Management Education	National	-	2016-17
89.	C.A Waghmare	Experimental analysis of residual stresses developed in metal inert gas welding of aisi 202 stainless steel	RIT N Con PG-17	National	594	2016-17
90.	C.A Waghmare	Effect of rake angle and cutting speed on cutting force, tool life and tool vibration of aisi 1020 steel on CNC turning by using single point cutting tool	RIT N Con PG-17	National	589	2016-17
91.	C.A Waghmare	Process characterization of fiber laser-mig hybrid welding (lmhw) of al alloy	MERME 2016	International	49	2016-17
92.	C.A Waghmare	changeable manufacturing system	MERME 2016	International	47	2016-17
93.	S.R Patil	Experimental study on wear of WC GT10 and OHNS 01 using ANOVA	International Conference on Modern Era Research in Mechanical Engineering 2016	International	-	2016-17
94.	S.R Patil	Application of Taguchi technique and ANOVA to experimental study of tribological behavior of materials pairs with case study	National Tribology Conference 2016 NTC2016 IIT BHU Varanasi	International	79-80	2016-17
95.	S.R Patil	Wear prediction of titanium nitrate coated 17-4 Ph SS by artificial neural network model	Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17)	National	-	2016-17
96.	. S.R Patil	Synthesis of BaTiO3 nanoparticles: its characterization, modification and application to Electrorheology.	Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17)	National	-	2016-17
97.	S.R Patil	Incorporation of Smart fluids in Dampers for Artillery Gun Recoil System.	Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17)	National	385	2016-17
98.	S.R Patil	A Study on Alternate Materials for Brake Pads	Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17)	National	-	2016-17
99.	S.R Patil	Design & Prototyping of Magneto rheological Disc Brake for Automotive Application	MERME-2016	International	585	2016-17
100.	S.R Patil	Posture Evaluation by Rula and Introduction to Pugh Matrix Technique.	NCRTM	National	585	2016-17
101.	M.M  Mirza	Experimental Stress Analysis of two wheeler connecting rod using photo elasticity	IJARIIE	International	1141	2016-17
102.	M.M  Mirza	Design & Analysis of water cooled submersible motor bearing using CFD and FSI	RIT NCOM PG-16	National	-	2016-17
103.	M.M  Mirza	Design &testing of magnetically levitated vertical axis wind turbine (VAWT)	MERME-2016. RIT	International	88	2016-17
104.	M.M  Mirza	A case study to improve consultancy in mechanical engineering department	ICTIEE-2017 Hyderabad	International	82	2016-17
105.	M.M  Mirza	Design &  development of multi-tasking MIG welding robot	MERME-2016. RIT	International	331	2016-17
106.	M.M  Mirza	Design & analysis of MRJ-T Cry cooler.	MERME-2016. RIT	International	435	2016-17
107.	M.M  Mirza	Sizing of A three phase separator for well head fluid in gas &oil industry	RIT NCOM PG-17	National	449	2016-17
108.	M.M  Mirza	Component design of hydraulic jack for sugar mill setting	RIT NCOM PG-17	National	454	2016-17
109.	A.M Mulla	Application of Analytical Hierarchy Process (AHP) :A Case Study of Warehouse Storage Selection	RIT PGCON-2017	National	-	2016-17
110.	A.M Mulla	A study of Electrolytic in process dressing(ELID) grinding	MERME 2016	International	-	2016-17
111.	A.M Mulla	Review on Micro-Forming and various process parameters affecting Micro-Forming.	MERME2016	International	521	2016-17
112.	A.M Mulla	Static and Dynamic analysis of Launcher system	RIT PGCON-2017	National	399	2016-17
113.	A.M Mulla	Launcher Vehicle under different load cases.		International	-	2016-17
114.	U. M  Nimbalakar	CAD Customization of Pressure Vessel using CATIA	Proceedings of the Digitalization: An Impact on Indian Society INCONRIT 2017	National	-	2016-17
115.	. U. M  Nimbalakar	Parametric Modeling of Pressure Vessel using CATIA Software	Proceedings of the 3rd RIT Post Graduate Conference (RIT PG Con-17)	National	423	2016-17
116.	U. M  Nimbalakar	Manufacturing Predictive Simulation: Use of WITNESS Simulation Software	Proceedings of the Digitalization: An Impact on Indian Society (INCNRIT 2017)	National	-	2016-17
117.	U. M  Nimbalakar	Parametric Modeling and Analysis to Optimizes size and location of openings in pressure vessel: a review	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	National	475	2016-17
118.	U. M  Nimbalakar	A Review on Integration Techniques of CAD/CAM/CAE	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	468-474	2016-17
119.	P. S.Jadhav	Lean Design of Assembly Line for Promoting Continuous Improvement	National Conference on Design, Manufacturing, Energy & Thermal Engineering at DACOE Karad	National	12	2016-17
120.	G.L  Surywanshi	Design and Development of Side Stand Re-tractor System for bikes	MERME-16(RIT)	International	297	2016-17
121.	S S Shirgupikar	Development of Thin Film Coating of CNT for Tools Used in EDM Processes	IMME17/Elsevier	International		2016-17
122.	S S  Shirgupikar	Experimental Investigation of Dry Electric Discharge Machining (Dry EDM) Process on Bright Mild Steel	IMME17/Elsevier	International		2016-17
123.	R.A Magdum	Design of 4-Reduction 3-Speed Gear Box	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	22	2016-17
124.	R.V Pawar	Design and analysis of Hybrid Composite double lap Riveted joint for tension.	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International	26	2016-17
125.	R.V Zende	Diameter and roundness measurement Using	Modern Era Research in Mechanical Engineering-2016 (MERME-16)	International		2016-17
126.	. A.B Chougule	Adaptive Front Luminous System Of Roadster on a way using Arduino.	IMME17/Elsevier	International		2016-17
127.	A.B Chougule	Pusher configured turboprop engine oil cooler ejector performance: CFD analysis and Validation	FMFP-2016	International	1	2016-17
128.	A.B Chougule	Water Heating System using Compound Parabolic Collector with Convex lenses	PNFE-2016	International	-	2016-17
129.	A.B Chougule	Enhancement of hardness property of AA2219 by varying TiO2 percentage as a Reinforcement	IMME17/Elsevier	International	-	2016-17