Year 2023-24

Group No.	Roll No.	Name of Guide	Project Title
1	2156004	Dr. S. B. Kumbhar	Performance analysis of tractor using compressed Biogas (CBG) as fuel
	2156011
	2156013
	2156041
2	2156009	Dr. S. K. Patil	Design and Development Cameback oven
	2156025
	2156028
	2156039
3	2006057	Dr. L. M. Jugulkar	Analysis of Heat recovery from parked vehicle
	2006050
	2006061
	2156005
4	2156002	Dr. S. S. Gawade	Improve the Indoor Air Quality (IAQ) by using Liquid Desiccant Air Condition (LDAC) System
	2156003
	2156006
	2156007
5	2006036	Prof. S. N. Sawant	A Hybrid Grass Cutting and Raking Machine
	2006068
	2006069
	2006076
6	2006084	Prof. M.V. Kavade	Regenerative Suspension system
	2006087
	2006088
	2006098
7	2006107	Dr. S. D. Patil	Design of test rig to check shape recovery property of various types of elastomeric shape memory alloy materials
	2006112
	2006121
	2006125
8	2006005	Dr. A. P. Shah	Performance and Emission Analysis of Biodiesel Derived from karanja oil
	2006008
	2006011
	2006017
9	2006058	Dr. R. G. Desavale	Dynamic Analysis of Rotor Bearing system and the impact of Defective Ball Bearing
	2002056
	2006035
10	2oo6108	Dr. M. B. Mandale	Deveelopment of Diameter Measurement Setup for Rings used in pumps
	2006115
	2006118
	2006124
11	2006020	Dr. M. V. Pisal	Automatic Fruit Scanner Machine
	2006030
	2006019
	2006015
12	2006072	Prof. M. L. Deshpande	Design and Development of Aerator for Aquacultural Industeries
	2006091
	2006114
	2006117
13	2156029	Prof. S. V. Kadam	Electric vehicle battery cooling using phase change material nad nanoparticles
	2156030
	2156031
	2156034
14	2005059	Prof. P. M. Jadhav	Investigation of Unbalance Response of Rotor- Bearing systems based on convolute nutral Network (CNN)
	2006006
	2006009
	2006013
15	2006037	Dr. C. A. Waghmare	Experimental investigation of machining parameters in Electrochemical Machining (ECM) machine
	2006089
	2006090
	2006094
16	2006039	Prof. M. M. Mirza	Design and Development Automatic Greasing Machine
	2006062
	2006078
	2006111
17	2006010	Dr. S. R. Patil	Commercialization of Cricket Ball Throwing Machine
	2006033
	2006018
	2006049
18	2156015	Prof.R. A. Magdum	Machine Learning-Asisted Prediction of formability during ISF process
	2156019
	2156027
	2156038
19	1706030	Prof. P. V. Gunjvate	Testing of Liquid desiccant dehumidiffier system
	1906048
	2006002
	2006022
20	2006077	Prof. P. S. Jadhav	Advanced diagonsis od deep grooved ball bearing spall defects in inner and outer race for improved machinery reliabilty
	2006109
	2006119
	2156022
21	2156001	Prof. G. L. Suryawanshi	Design and Development of machine for Assembly of wire connector
	2156008
	2156020
	2156021
22	2006054	Prof. R. V. Pawar	Design and Development of Multipurpose Agricultural Tiller
	2006048
	2006023
	2006074
23	2156010	Prof. R. A. Patil	Design and Development of pressure vessel usung SMA Composite
	2006064
	2006065
	2006079
24	2006100	Prof. S. A. Lavate	Design and Development of Automatic Threads Checking Machine
	2006102
25	2006004	Prof. A. K. Patil	Segregation of Plastic from the waste
	2006043
	2006044
	2006056
26	2006007	Prof. P. C. Chavan	Development of conductive ink 3D printer for PCB Manufacturing
	2006046
	2006055
	2006066

Year 2022-23

Group No.	Roll No.	Name of Guide	Project Title
1	1906091	Dr. S. K. Patil	Semi-automatic sewage cleaning system
	1906088
	1906062
	1909042
2	1906035	Prof. Swapnil Lahane	Experimental analysis of oxygen enrichment on engine performance and Emission
	1906003
	1906017
	1806014
3	1906058	Dr. S. S. Gawade	Performance analysis of solid desiccant dehumidifier
	1906079
	1906052
	1906024
4	1906030	Prof. B. R. Jadhav	Designing and fabrication of automatic drainage machine
	1906043
	1906050
	1906064
5	1906036	Prof. M.V. Kavade	Design and development of Oil skimming machine
	1906037
	1906042
	1906028
6	1906056	Prof. S. N. Jalwadi	Design and Development of microbial fuel cells for electricity generation
	1706029
	1906063
	1906086
7	1906078	Dr. S. D. Patil	Synthesis and analysis of composite phase change material for battery thermal management
	1906108
	1909049
	1909050
8	2056020	Dr. A. P. Shah	Design and development of automatic weighing and packing machine
	2056021
	2056022
	2056027
9	1906107	Dr. R. G. Desavale	Study on experimental vibration characteristics of rolling bearing with radial clearance
	1906104
	1906038
	1906012
10	1906061	Dr. M. B. Mandale	Investigation of noise reduction in an acoustic enclosure using acoustic metamaterials (AMM)
	1906068
	1906076
	1906039
11	1906041	Prof. M. V. Pisal	Sugarcane trash removal machine
	1906082
	1906083
	1906085
12	2056004	Prof. M. L. Deshpande	Design and fabrication of wind turbine tree
	2056006
	2056028
	2056031
13	2056017	Prof. S. V. Kadam	Automated guided vehicle
	2056023
	2056025
	2056026
14	1906008	Prof. P. M. Jadhav	design and development and testing of test rig for dual plate check valve
	1906013
	1906129
	1909032
15	1906033	Prof. C. A. Waghmare	Design and fabrication of portable abrasive air jet machine (AJM)
	1906029
	1906031
	1906034
16	1906106	Prof. M. M. Mirza	Design CFD analysis and fabrication of convergent -divergent nozzle operated wind turbine
	1906099
	1906110
	1906105
17	1906047	Dr. S. B. Kumbhar	Design, Fabrication and testing of hybrid grass cutter system
	1906053
	1906059
	1906057
18	1906049	Prof. S. R. Patil	Automatic system for pre-treatment in powder coating
	1906051
	1906010
	1906011
19	1906021	Prof. A. M. Mulla	Automatic linear actuator with timing belt
	1906065
	1906123
	1806094
20	1906087	Prof. U. M. Nimbalkar	Design and Development of Multi Nozzle solar operated Sprayer
	2056001
	2056009
	2056030
21	1906133	Prof. P. V. Gunjvate	Effect of liquid desiccant input parameters on the performance of the dehumidifier
	1906121
	1906118
	1906092
22	2056003	Prof. P. S. Jadhav	Fabrication and performance study of asymmetric super capacitor device using cobalt (CO) based nanomaterials
	2056007
	2056013
	2056015
23	1906032	Prof. S. B. Khot	Design and development of portable hydraulic modification kit for manual sheet bending machine
	1906044
	1906002
	1906023
24	1806064	Prof. G. L. Suryawanshi	Dynamic analysis of rotor bearing system with coupling and local defect
	1906026
	1906066
	1906040
25	1906094	Prof. S. S. Shirguppikar	Experimental investigation of CNT and graphene coated tools for micro electro discharge machining process for machining of Ti6A14v
	1906094
	1909003
	1909044
26	1906020	Dr. Vaibhav Ganachari	Vibration isolation of ambulance stretcher using scissor like mechanism with application of semi active control method
	1906014
	1906015
	1906090
27	1906072	Prof. S. N. Sawant	Experimental investigation of micro drilling of Ti-6Al-4V using EDM by varying work piece thickness
	1906046
	1906004
	1906120
28	1906112	Prof. R. V. Pawar	Rheological and tribological analysis of vegetable based bio lubricant synthesised from edible oil
	1906077
	1906122
	1906025
29	1906075	Prof. R. A. Magdum	Warm incremental forming of mg alloy to study formability with variable wall angle test
	1906124
	1906113
	1906126
30	1906045	Prof. P. A. Patil	Graphene supported ultra-Nano filtration for waste water treatment
	1806120
	1906001
	1906109
31	1906005	Dr. S. D. Patil	characterisation and thermal analysis of composite phase change material for battery thermal management system
	1906006
	1906007
	1906119
32	2056012	Prof. R. A. Patil	Dynamic analysis of shape memory alloy (SMA) reinforced composite
	2056016
	2056018
	2056019
33	1906127	Prof. A. B. Pawar	Design and Development of Magnetic field set up in Electrochemical Machine (ECM)
	1906097
	1906114
	1906116
34	1906016	Prof. S. A. Lavate	Semi-automatic ceramic bush chamfering machine
	1906018
	1906019
	1906060
35	1906081	Prof. A. K. Patil	Design and development of rotary finned heat exchanger for electric vehicles
	1906084
	1906095
	1906125
36	1906067	Prof. P. C. Chavan	Medicine and bio equipment storage system allied with block chain
	1906073
	1906080
	1909023
37	1906070	Prof. R. V. Pawar	Experimental investigations of rheological and tribological performance of non-edible oil based bio lubricant
	1906071
	1906115
	1906130
38	2056002	Prof. Shridhar Deshmukh	Automated guided vehicle
	2056008
	2056011
	1906055
39	1906009	Prof. S. V. Kadam	waste heat recovery from refrigeration system
	1906027
	2056005
	2056024

Year 2021-22

Group No.	Roll No.	Name of Guide	Project Title
1	1801041	Dr. S. K. Patil	Automated Sugarcane bud cutting machine
	1806043
	1805051
	1806127
2	1806006	Dr. S. S. Gawade	Design and Development of Electromagnetic Vibration Absorber
	1806007
	1806008
	1806059
3	1801031	Prof. B. R. Jadhav	Classification of Sugarcane billet using computer vision
	1806100
	1806083
	1706126
4	1806030	Prof. M.V. Kavade	Formula Based Tubular Space Frame
	1806033
	1806010
	1806018
5	1806016	Prof. S. N. Jalwadi	Generation of power through speed Breakers
	1806048
	1806053
	1806060
6	1806068	Dr. S. D. Patil	Improvement in existing chapati maker machine
	1806092
	1806123
	1806057
7	1806077	Dr. A. P. Shah	Design and development of Chassis for E-bike designed for rural people as per their need
	1806116
	1806118
	1808039
8	1956005	Dr. R. G. Desavale	Electric vehicie Turbo charges (EVTc)
	1956007
	1956009
	1956011
9	1806004	Dr. M. B. Mandale	Automatic roofing system for Agricultural land
	1806052
	1806045
	1806041
10	1806087	Prof. M. V. Pisal	Development of Technology for manufacturing Jaggery Cubes.
	1806090
	1806091
	1806101
11	1806002	Prof. M. L. Deshpande	3D Printer for Concrete
	1806037
	1806067
	1806071
12	1806029	Prof. S. V. Kadam	Design and development of thermal conductivity measurement equipment
	1806055
	1806078
	1806034
13	1806017	Prof. P. M. Jadhav	Design and Manufacturing of Special Purpose Hydraulic Cold Rolling Machining
	1806044
	1806046
	1806125
14	1806105	Prof. C. A. Waghmare	Automatic Welding machine for Stator Stack
	1806113
	1806117
	1806132
15	1806027	Dr. S. B. Kumbhar	IOT based lubrication replacement system using condition-based monitoring.
	1806036
	1806013
	1806011
	1806022
16	1806084	Prof. S. R. Patil	Automated ball feeding mechanism to cricket ball throwing machine
	1806088
	1806061
	1806021
17	1806038	Prof. A. M. Mulla	Develop low cost Electvo static spraying system
	1806040
	1806054
	1806005
18	1806025	Prof. M. M. Mirza	Affordable Universal E-Bicycle Convertible Kit
	1806026
	1806042
	1806027
19	1806072	Prof. U. M. Nimbalkar	Optimization of Dental Articulator
	1806076
	1806081
	1806121
20	1802050	Prof. P. V. Gunjavate	CFD analysis of liquid desiccant air conditioning system
	1806001
	1806003
	1806106
21	1956001	Prof. P. S. Jadhav	Enhancement of machinability of Inconel alloy by using   MQC
	1956004
	1956006
	1956019
22	1806108	Prof. S. B. Khot	Implementing productivity improvement tools and techniques for enhancing overall efficiency and effectiveness at a small-scale industry
	1956003
	1806097
	1806112
23	1806075	Prof. G. L. Suryawanshi	Design and Development of Corn separator
	1806114
	1806122
	1806124
24	1806012	Prof. S. S. Shirguppikar	3D Priting of Circuits using Graphene Ink
	1806095
	1806096
	1806109
25	1806020	Prof. L. R. Patil	Ankle foot orthosis using composite materials
	1806028
	1806031
	1806049
26	1706016	Prof. S. N. Sawant	Design and Development of Multipurpose machine tool for drilling and Cutting
	1606126
	1606120
	1706009
27	1806130	Prof. R. V. Pawar	Investigating Tribological Perfromance of Biolubricants
	1806035
	1706063
	1801043
28	1806073	R. A. Magdum	Formability analysis of Magnesium alloy during Incremental sheet formingFormability analysis of Magnesium alloy during Incremental sheet formingFormability analysis of Magnesium alloy during Incremental sheet forming
	1806082
	1806093
	1806098
29	1806032	Prof. P. A. Patil	Performance evaluation of Nano-particle based environment friendly cutting fluid in micro drilling process
	1806079
	1806102
	1806047
30	1806062	Prof. K. P. Powar	Preparation of Composite Phase Change Material for Thermal Management Application
	1806085
	1806110
	1806115
31	1806009	Prof. R. A. Patil	Design and Development of PLC Based Automatic Welding Mechanism
	1806050
	1806051
	1806099
32	1956012	Prof. A. B. Pawar	Design of Automatic TIG welding machine
	1956016
	1956017
	1956020
33	1956010	Prof. S. A. Lavate	Automatic Profile cutting Machine
	1956013
	1956015
	1956018
34	1956014	Prof. A. K. Patil	Design and Battery thermal management system and chassis for Automated guidad vehicle
	1956008
	1806080
	1806024
35	1706085	Prof. P C Chavan	Development of Bio degradable Cup
	1706088
	1856013
	1806063
36	1706089	Prof. B. R. Jadhav	Classification of sugar cane Billat using computer vision
	1606004
	1706055
	1606081
37	1706082	Prof. C. A. Waghmare	Influence of Graphene Material in Electro-Discharge Machining Process of Ti-6Al-4V
	1706115
	1706127

Year 2020-21

Sr.No	Student Details		Project Title	Guide Details
	Student Name	Roll NO		Name
1	Sanket Chandrakant Taware (L)	1706052	Design and development of semi-automatic coconut scrapping machine	Dr. S. K. Patil
2	Sarang Bhalchandra Jadhav	1706069
3	Aniket Chandrakant Jadhav	1706021
4	Shubham Anil Taware	1706095
5	Guruprasad Ulhas Palankar	1856001	Design and development of tamarind cover and seed removal machine	Dr. S. S. Gawade
6	Sunil Uttam Aldar	1856002
7	Omkar Vilas Shelake	1856003
8	Ajay Vishwas Jadhav (L)	1856027
9	Pranav Dilip Desai.	1606050	180 Degree Rotating Dumper Model With Pneumatic System	Prof. B. R. Jadhav
10	Shradha Vijay Kadam.	1706097
11	Shweta Chandrakant Limkar.	1856008
12	Lata Subhash Bansavade. (L)	1856019
13	Anas Ismail salagar(L)	1756017	Design and analysis of pneumatic door operated system for train	Prof. S. N. Jalwadi
14	Samrat Vijay Patil	1406127
15	Soham Sunil Shete	1606011
16	Omkar Bhaskar Patil	1606095
17	Khavare Vaibhav Chalu (L)	1706080	Design and developement of semi-automatic cashew fruit seperation and collection machine.	Dr. S. D. Patil
18	Mane Aditya Vijay	1706086
19	Jadhav Yash Jagannath	1706087
20	Sawardekar Omkar Raju	1706098
21	Vaibhav Bandu Yadav	1856009	Design and development of automatic stator winding machine for submersible motor	Dr. A. P. Shah
22	Vishakha Pratap Sadamat	1856012
23	L.Prashant Rajesh Dhongade	1856014
24	Shriya Sanjay Jamadade	1856021
25	Shruti Ashok Shinde	1702048	Study on vibration characteristics analysis of cylindrical roller bearing with single and multi-defect.	Dr. R. G. Desavale
26	Prasanna Ashok Rasal (L)	1706011
27	Rohit Rajkumar Patil	1706018
28	Satwashil Bhanaji Rajemahadik	1706022
29	Swami Akash Ashok	1706073	Design and development of multipurpose attachments for agriculture equipment	Prof. M. L. Deshpande
30	Mali Anup Sanjay (L)	1706076
31	Mohite Satyajit Sanjay	1706101
32	Kharge Dipak Dilip	1706103
33	Niranjan Rajendra Mahishale(L)	1706048	Root vegetables washing machine	Dr. M. B. Mandale
34	Sonali Balaso Saudagar	1856006
35	Amey Prashant Pathak	1706116
36	Sasmit Shrirang Patil	1706015	Solar operated multipurpose agriculture cultivator	Prof. S. V. Kadam
37	Ranu yuvraj Kadam	1706020
38	Prajakta Ramrao patil	1706026
39	Jyoti Arun Kamble	1706057
40	Vishavdeep V. Pawar	1706034	Fault diagnosis and Vibration Analysis of Cylindrical Roller Bearings based on ANN (Artificial Neural Network)	Prof. P. M. Jadhav
41	Swapnil B. Kundale	1706067
42	Bhalchandra R. Yalmali (L)	1706091
43	Pranav V. Deshpande	1706132
44	Harshawardhan Ramchandra Patil	1706017	Design and development of remote controlled lifebuoy	Dr. S. B. Kumbhar
45	Omkar Suhas Mohite (L)	1706028
46	Subhan Saleem Inamdar	1706044
47	Aboli Santosh Kirve	1706104
48	Anush Rajendra Mangave (L)	1706036	Parametric analysis of Fused deposition model printers for Biodegradable filament material	Prof. C. A. Waghmare
49	Adarsh Prakash Patil	1706040
50	Abhishek Vaman Wangade	1706046
51	Swapnil Prahald kalel	1706051
52	Momin Musaddik Harunrashid	1856017	Design, CFD Analysis and Fabrication of Convergent-divergent nozzle operated wind turbine	Prof. M. M. Mirza
53	Mungurkar Suhas Pandurang	1856020
54	Purohit Bhawarlal Amritlal	1856022
55	Barhate Dhanshrey Yograj (L)	1856023
56	ROHIT P. CHAVAN	1706070	Customization of Cricket Ball Throwing Machine	Prof. S. R. Patil
57	SAURABH B. PATIL	1706084
58	(L) NANDKISHOR A. SALOKHE	1706107
59	PRASANNA R. NIKAM	1706111
60	Lad Indrajit Popat	1706049	Design of chassis and steering system for Automated Guided Vehicle (AGV).	Prof. A. M. Mulla
61	Bhosale Shivanjali Shalivan	1706053
62	Suryawanshi Prashant Shrikant	1706110
63	Shinde Ruturaj Madhav(L)	1706124
64	Rahul Vishwas Arabune (L)	1606117	Design and development of automatic weeder	Prof. R. V. Pawar
65	Kajal Parshuram Bhandare	1606006
66	Shreyash Vikas Vasagadekar	1601051

Year 2019-20

Group No.	Roll No.	Supervisor Name	Project Title
1	1606083	Dr. S. K. Patil	Design and Development of Coconut Cutting and Scrapping Machine
	1606062
	1606067
	1606014
2	1606065	Dr. S. S. Gawade	Design of sand Reclamation unit for improving quality of sand in foundry
	1606107
	1406011
3	1606027	Prof. M.V. Kavade	Design and Development of SMA actuator for Sorting machine
	1606028
	1606044
	1606031
4	1606090	Prof. B.R. Jadhav	Experimental investigation of cryogenic assisted hard turning of D2 steel
	1606089
	1606060
	1606086
5	1606102	Prof. S. N. Jalwadi	Enhancement of thermal efficiency in solar water heater by using nanoparticles
	1606104
	1606108
	1606112
6	1606048	Dr. S. D. Patil	Design and Development of lithium ion battery pack for e-Quad Bike
	1606040
	1606023
	1606105
7	1756020	Dr. R.G. Desavale	Impriving the productivity of assembly line using suitable industrial engineering technique.
	1756026
	1756016
	1606071
8	1606045	Prof. M. L. Deshpande	Development of grain collector integrated with weight sensor by using screw conveyer
	1756005
	1606123
	1756023
9	1606069	Prof. M. B. Mandale	Automatic Puran Making Machine
	1606072
	1606074
	1606103
10	1606056	Prof. S. V. Kadam	Experimental investigation of Heat Transfer Enhancement using Nanofluid in Aluminium Tube
	1606064
	1606073
	1606101
11	1606094	Prof. P. M. Jadhav	Investigation of Unbalance Response of Rotor-Bearing Systems Based on Support Vector Machine
	1606093
	1606092
	1606079
12	1606046	Prof. S. B. Kumbhar	Shape Memory Alloy Actuated Battery cooling Sytem
	1606057
	1606084
	1606109
13	1606054	Prof. C. A. Waghmare	Light weight goods Delivery Drone
	1606075
	1606088
14	1606052	Prof. S. R. Patil	Automation and Commercialization of Circket Ball Throwing Machine
	1606020
	1606116
	1602017
15	1606099	Prof. R. V. Pawar	Design and Development of Automatic chakli making machine
	1756022
	1606098

Year 2018-19

Group No.	Roll No.	Supervisor Name	Project Title
1	1501052	Dr. S. K. Patil	Design and development of semi automatic multi operational coconut machine
	1505017
	1506012
	1506065
2	1506122	Dr. S. M. Sawant	Thrust improveemnt of electric unmanned aerial vehicle
	1506124
	1506125
	1506106
3	1506096	Dr. S. S. Gawade	AEV
	1506094
	1506103
	1508053
4	1506073	Prof. M.V. Kavade	Plastic injection mold design with flow simulation
	1506083
	1506090
5	1406044	Prof. B.R. Jadhav	Analysis of heat dissipation in hydraulic shock absorber and implement method to increase heat dissipation
	1506001
	1506007
	1506017
6	1656004	Prof. S. N. Jalwadi	Stractural analysis of the polymer composite for the car bonnet
	1656005
	1656011
	1656020
7	1506056	Dr. S. D. Patil	Design and analysis of composite material for evaporator of vapor compression refrigeration system
	1506066
	1506074
	1506016
8	1506003	Dr. A.P. Shah	Design and developemnt of cross flow heat exchanger
	1506018
	1506022
	1506042
9	1506093	Dr. R.G. Desavale	Analysis on distribution bearing defects using experimental data models
	1506109
	1506115
	1506119
10	1506052	Prof. M. V. Pisal	Design and developemnt of soybean dryer
	1506059
	1506057
	1506062
11	1506019	Prof. M. L. Deshpande	Restracturing the AC warehouse to optimize the motion an incrase the
	1506027
	1506087
	1406116
12	1506069	Prof. M. B. Mandale	Design and development of adjustable steering system for formula styled vehicle.
	1506076
	1506091
	1506100
13	1503024	Prof. S. V. Kadam	Experimental analysis of heat transfer rate on automotive radiator using CuO- water Nano fluid
	1506051
	1506084
	1656023
14	1506031	Prof. P. M. Jadhav	Car window Glass Breaking system using shape memory alloy for passengers safety
	1656007
	1656022
	1506071
15	1506047	Prof. S. B. Kumbhar	Design and development of actuator in crane breaking system using shape meomery alloy
	1506078
	1506034
	1656021
16	1506013	Prof. C. A. Waghmare	Design and development of Precision farming robot
	1506014
	1506021
	1506026
17	1506006	Prof. M. M. Mirza	Exoskeleton arm with Pneumatic muscle actuation
	1506009
	1506102
	1506118
18	1656019	Prof. S. R. Patil	Development of ball throwing machine useful for cricket
	1656006
	1656010
	1656024
19	1506008	Prof. A. M. Mulla	AEV
	106053
	1506011
	1506061
20	1506005	Prof. U. M. Nimbalkar	Design and fabrication of automated wheelchair
	1656022
	1506121
	1506036
21		Prof. P. V. Gunjvate	Development of phase change material for solar cooking appkications
	1506116
	1506111
	1506107
22	1656001	Prof. P. S. Jadhav	Cryogenic assisted machining of Nimonic C-263 alloy
	1506060
	1506114
	1506126
23	1406113	Prof. S. B. Khot	Productivity improvement by time study for SME using advanced techniques
	1506092
	1506098
24	1501018	Prof. R. V. Pawar	Performancwe analysis of vegetable oil as bio-lubricant
	1506025
	1506035
	1506039

Year 2017-18

Group No.	Roll No.	Supervisor Name	Project Title
1	1406018	Dr. S. K. Patil	Design and Development of Multi operational Coconut Machine
	1406026
	1406030
	1406056
2	1406025	Dr. S. M. Sawant	Design, Analysis and Manufacturing of composite shoe spikes
	1406052
	1406035
	1402017
3	1406073	Dr. S. S. Gawade	Design and Development of Onion Dehydrating System
	1406115
	1406119
	1406105
4	1406006	Prof. M. V. Kavade	Design and Development of an Automated Sandwich Maker
	1406103
	1406104
	1406022
5	1405005	Prof. B. R. Jadhav	Design and Devl. of Stewart Platform using Linear Actuators for Virtual Reality Applications
	1406037
	1406043
	1406032
6	1406063	Prof. G. L. Surywanshi	Development of Human Urine Conditioning Kit for its use as a Fertilizer
	1406067
	1406010
	1406014
7	1406068	Prof. S. N. Jalwadi	Design and Development of Small Scale paper Recycling Machine
	1406059
	1406072
	1406045
8	1406016	Dr. S. D. Patil	Design, Development and Testing of Hydraulic Press Machine for Rotar Shaft Assembly and Required fixture
	1406023
	1406031
	1406125
9	1306028	Prof. R. G. Desavale	Vibration Analysis of Rolling element bearing considering misalignemnt
	1306122
	1306112
	1556015
10	1406118	Prof. M. L. Deshapande	Design and Development of tilting mechanism for pouring milk from milk can into processing tank
	1556002
	1556014
	1556018
11	1406090	Prof. M. B. Mandale	Effect of nano refrigeration in refrigeration system
	1556010
	1556013
	1556019
12	1406082	Prof. S. V. Kadam	Design and Devlopment of Efficient Air Conditioning System using Air Blower
	1406083
	1406084
	1406057
13	1406092	Prof. P. M. Jadhav	Egg Boiling and Peeling Machine
	1408010
	1406077
	1406111
14	1406003	Prof. S. B. Kumbhar	Manually operated Disposable Metallic Can Crusher
	1406021
	1406008
	1306025
15	1406036	Prof. C. A. Waghmare	Investigation of effect of silicon powder mixed into dielectric of EDM on surface integrity of D2 Die Steel
	1406047
	1406097
	1406039
16	1406069	Prof. U. M. Nimbalakar	Design and Development of Sugarcane Leaves detrashing Machine
	1406081
	1406061
	1406048
17	1406012	Prof. S. R. Patil	Multipurpose Automatic Pressing and Folding Machine for Plain Cloths
	1406093
	1406002
	1406123
18	1406070	Prof. A. M. Mulla	Design and Development of Four way Electrical motor operated Hacksaw Machine
	811307
	1406117
	1406034
19	1406004	Prof. R. A. Magdum	Manufacturing and Analysis of Metal matrix composite by powder metallurgy method
	1306115
	1306018
	1306082
20	1406065	Prof. P. V. Gunjwate	Design and Analysis of automobile Spoiler and wing using Bio-composite
	1406075
	1406017
	1406079
21	1556006	Prof. P. S. Jadhav	Enhancing Productivity of Arrow Metaliks Foundary by Improving Its plant layout
	1406094
	1406080
	1406051
22	1406102	Prof. S. B. Khot	Design and development of Multi Seed Sowing Machine
	1406121
	1408007
	1408019
23	1406024	Prof. M. M. Mirza	Analysis and modification in crop harvester for smooth operation
	1406074
	1406106
	1406108
24	1556007	Prof. R. V. Pawar	Performance of CI engine using biodiesel and its blends
	1556009
	1556020
	1556021
25	1306012	Prof S. N. Sawant	Design and Development of Motorcycle Chain Cleaning and Oiling Machine
	1406126
	1406128
	1406050
26	1406101	Prof. L. R. Patil	Design and Manufacturing of dust cleaning system for flour mills using Venturies
	1406091
	1406099
	1406120

Year 2016-17

Group No.	Roll No.	Name of Guide	Project Title
1	1306001	Prof. P. V. Gunjawate	Design and Development of Chasis Frame and Suspension System of a FORMULA syle race car
	1306027
	1306029
	1306074
2	1306005	Dr. S.S.Gavade	Design, Development and Testing of Sugarcane sowing Machine
	1306008
	1306030
	1306033
3	1301004	Dr. M.T.Telasang	Design and Development of exhaust air opertaed inbuilt inflating jack for automobile
	1306044
	1306061
	1306063
4	1306002	Prof. M. L. Deshpande	Design and Manufacturing of adjustable storage rack
	1306015
	1306023
	1306042
5	1306019	Dr. S.M.Sawant	Automation of chain link fence making machine
	1306026
	1306110
	1308031
6	1306124	Prof. M.B.Mandale	Design and Development of Indian Nashta maker
	1306107
	1306109
	1306113
7	1306034	Prof.M.V.Pisal	Design of Centralized coolant filteration system
	1306036
	1306056
	1306101
8	1011034	Prof.R.V.Zende	Full proof safety system with automatic middle and side stand for 2 wheeler
	1206009
	1206050
	1206088
9	1306062	Prof.A.S.Patil	Use of ER fluid in quick return mechanism
	1302043
	1306052
	1306059
10	1306011	Prof. P. M. Jadhav	Design of mechanical driving system based on button spinner for permanent magnet synchronous generator
	1306016
	1306014
	1306020
11	1306017	Dr. S. D. Patil	Performance and thermal analysis of IC engine using Bio-Diesel
	1456008
	1306045
	1306057
12	1456002	Prof. C.A.Waghamare	Optimization and Analysis of EDM for Surface integrity using FUZZY logic
	1456003
	1456004
	1456006
13	1306060	Prof. R.A.Magadum	Design, Analysis and Optimization of three roll plate bending machine
	1456011
	1456022
	1456024
14	1306024	Prof. S.V.Kadam	Heat and Fluid flow analysis of corrugated pipe by using nano-fluid
	1306041
	1306037
	1306010
15	1306083	Dr. S.K. Patil	Design and Development of multisize stapler
	1306073
	1306092
	1306077
	1306111
16	1306067	Prof. M. M. Mirza	Mutipurpose mini crop harvester
	1306070
	1306081
	1206122
17	1306004	Prof.  M.V. Kavade	Phenomenological study of EDM
	1306095
	1306116
	1306086
18	1306114	Prof. P.S. Jadhav	Investigation for efficiency of double connecting rod of four stroke CI engine
	1306117
	1306118
	1306128
19	1306104	Prof. N.K.Chhapkhane	Automatic Tamarind pulp separating machine
	1306105
	1306066
	1306096
20	1306089	Prof. S. R.Patil	Design and manufacturing of automatic Bhel wending machine
	1306091
	1306093
	1306102
21	1306078	Prof. S.B.Khot	Design, Manufacturing and Testing of Automatic Boiler feeding system for SSI
	1306085
	1306090
	1306108
22	1306053	Prof. S.N. Jalwadi	Characterization of composite material under static loading condition
	130058
	1306072
	1306040
23	1456010	Prof.A.M.Mulla	Design and Modification of existing special purpose centre drilling machine
	1456015
	1456016
	1456019
24	1306106	Prof. L. R. Patil	Design and Development of hydraulic lift for lifting industrial goods
	1306069
	1306127
	1206068
25	1456001	Prof. U.M.Nimbalkar.	Performance and Emmision testing by using Bio-diesel and its blends for VCR engine
	1456023
	1456013
	1456021
26	1306065	Prof. A.M.Mulla	Design and Development of flexible Grinding machine
	1306098
	1306038
	1456017
27	1306055	Prof. G.L. Suryawanshi	Design and Development of Self temperature regulating roof
	1306021
	1306022
	1306046
28	1306087	Prof. R.V.Pawar	Design and Development of multipurpose high traction manual tiller
	1306080
	1306076
	1306084
29	1306039	Prof. S. N. Sawant	Design and Development of shaft gripping mechanism for overhead crane
	1306064
	1306068
	1306071
30	1306047	Prof.K.P.Pawar	Development of mud removal mechanism for agricultural Rotavetor
	1304022
	1306043
	1306009
31	1456005	Prof. S.A.Danane	Seed plantation and Sowing machine
	1456007
	1456009
	1456020
32	1306103	Prof.  A.B. Chougule	Design, Analysis and Fabrication of compound parabolic collector for domesic purpose with Nano-Fluid as working fluid
	1306123
	1306125
	1306126
33	1306075	Prof.Pratik Patil	Design, Manufacturing and Analysis of composite material plates for drainage and manhole applications
	1306121
	1306119
	1306031
34	1306051	Prof. S.S.Shirguppikar	Design and Improvement in mobility system of the planetary Rover for stability on uneven terrian
	1306013
	1306007
	1456018
35	1206001	Prof. B.R.Jadhav	Design and fabrication of leather braiding machine
	1106107
	1206126
	1306006
36	1106123	Prof. U.M.Nimbalkar.	External glass wall cleaning system
	1006074
	1456012
	1456014
37	1306032	Pros A.B. Pawar	To improve radiator and overall engine performance by using nano-fluids

“Design and development of manual weeding machine with crop fertilizing arrangement”.

Weeds are one of the major causes of loss of agricultural produce. Various conventional methods of weed removal are time consuming and costly. Also force required for convectional weeding machine is large. So to eliminate these demerits, this weeding machine is designed. It minimizes human efforts as the force required to operate the machine is less and requires only one person for weeding and fertilizer operation. The fertilizing arrangement is designed which spreads fertilizer with uniform distribution over the land and it provides proper mixing with soil. As the weeding and fertilizing process operates simultaneously, so it is helpful for the farmers of rural India with small farming space.

Photograph of working model

Multi Discharge Valve

Multi discharge of valve is 4 in 1 ball valve. It is mainly used in water irrigation system. This is one of the types of ball valve. This valve has 1 inlet and 3 outlets. The size of inlet is twice that of the outlet. Depending upon the requirement such as only 1 open or 2 or 3 open; we can on off the flow from different outlets by simply adjusting handle manually. This can be used in chemical process industry for mixing purpose by interchanging inlets by outlets and vice versa. The cost of this ball valve is 0.5 times less than three same size ball valve and floor space is 0.4 times less than three same size ball valve. Outcome: Ball valve is easy to handle, less effort and maintenance is required as compare to same size ball valve. Also it can replace three ball valve.

Photograph of working model

“Design of commercialized process for manufacturing sweet potato & Dry Ginger Powder”

In this project, design of commercialized process for the production of Sweet Potato and Dry Ginger Powder is done and a detailed business project report consisting required parameters regarding setting up SSI for such product is prepared. Though India is an agro-based nation, it is an unfortunate truth that less than 2% agriculture products are processed further so that they can be stored for longer period, good market value can be given to them and they can be made available during OFF season. In this project the appropriate drying technique is selected and optimized by using thermal modeling and analysis for the respective process and equipment’s required for the process are selected based on selected capacity of plant. Finally technically feasible and financial viable project report is prepared which can open new avenues in entrepreneurship for farmers and entrepreneurs by starting their own SSI for such product.

Photograph of working model

Design, Development and Performance Testing of self-balancing e-Vehicle

The Personal Transporter is a small footprint electrical vehicle designed to more environmentally friendly transportation method. This kind of vehicle is interesting since it contains a lot of technology relevant to an environmentally friendly and energy efficient transportation industry. The main purpose is to design and construct a fully functional o wheeled balancing vehicle which can be used as a means of transportation for a single person. There is also an encouragement for the students to learn areas outside their field of specialty, to form a better holistic understanding for these kinds of system.This kind vehicle contains many of the technologies required to build a hybrid or electrical car, and is sufficiently small to be good platform for experimentation and learning for engineers aiming to build more environmental friendly passenger vehicle. Air pollution, global warming and need of sustainable energy pushes the demands for efficient, green energy powered vehicles. All mechanics, electronics and software were first designed using a top down approach, to promote good structure and division into subsystems. The top down approach is also a good way to make sure no functionality is left unimplemented. All mechanical design is made with the help of the CAD software using a top-down approach. Eve part of the model is then converted to a drawing and printed for use in the mechanical. The component selection required some basic theory of electric motors, drive circuits and batteries acquired from segway literature. This theory in combination with the project goals served as reference when comparing components on the basis of performance, cost, availability and robustness workshop where all mechanics were constructed. The electrical system is also designed using a top-down approach; finally the finished system is tested and assessed relative to the initial purpose.

Photograph of working model

“Automated Capacitor Packaging System.”

The industry “YASHA CAPACITORS PVT LTD.” manufactures the capacitors for variable applications by manual work. They are manufacturing different types and sizescapacitors and production of capacitors per day is variable. Our work is to make resin material and adding into can. In the conventional method they heat oil up to 80-90°C in the container and then add powder and hardener into oil in the proportion of 100:100:16. Then mixture is added into cans as per required quantity. All these processes are carried out manually and workers required are 34. So to avoid this we have designed and developed system. With this system we are going to carried out mainly 3 processes i.e. preparing mixture of heated oil and powder in the tank and adding into can though solenoid valve. Second is addition of hardener in to can. And third is to make proper homogeneous mixture of oil, powder and hardener in the can using stirring mechanism. Cans are supplied thought conveyor and detected by IR sensor. When can is detected then conveyor will be stopped and above 3 processes will be carried out. After stirring cans are taken out manually and electrodes are added into can. Then cans are placed for cooling.

Outcomes:

• By use of this Automated Capacitor Packaging System following outcomes were obtained: Direct contact of resin material with workers is reduced.
• Wastage of material during material handling is reduced.
• Homogeneity of material is increased because of stirring mechanism and less human interference.
• Production rate is increased and maximum 2 workers are required.

Solar Grain Dryer and Roster

Innovative Method for Drying and Roasting of Grains by using solar energy with the help of parabolic trough. This project is completed by Final year mechanical students.

 

Line Follower Mobile Robot

The robot with built In Intelligence equipped with IR and Optical Sensors follows the line and navigate, built at IUCEE workshop at Chandigarh in Jan 2011. This project is completed by Final year mechanical students.

Pipe Climber Robot

Pneumatically Operated, PLC controlled, robot can climb pipes vertically, mainly useful for Inspection of Pipes and Survey during Natural disasters like earthquake or bomb blast to detect survival of human lives. This project is completed by Final year mechanical stude